Board
Filip-Kin·frc-radio-kiosk·Radio_Kiosk_v2b/board.kicad_pcb
About the Board
Board is an open source STM32 PCB design by Filip-Kin, published on GitHub. It is a 2-layer board measuring 84 × 141 mm, with 235 components from 111 distinct parts.
Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the LM74700-Q1, C841384, C48112, TLV7011 and C115907. By type, the board carries 80 resistors, 78 capacitors, 22 ICs, 20 transistors, 13 diodes and 10 connectors.
It belongs with the rf & radio designs in this gallery.
From the project
Bench box that powers and configures FRC radios: dual-mode PoE (802.3at via LTC4279, passive 12 V via TPS26600), USB-C PD or DC in, 15.6 V out for the Toughbook, 4x CR123A backup, STM32F072 firmware.
Bench box that powers and configures FRC radios: dual-mode PoE (802.3at via LTC4279, passive 12 V via TPS26600), USB-C PD or DC in, 15.6 V out for the Toughbook, 4x CR123A backup, STM32F072 firmware.
- RadioKioskv2/ first full board, 100 x 130 mm - RadioKioskv2b/ hand-packed board, 84 x 133 mm, 2 oz copper (order that at JLC) - RadioKioskv2d/ 4-layer rework of v2c, 85 x 120 mm, In1 GND plane (see its NOTES.md) - RadioKioskv1/ the built board, 70 x 105 mm: USB-C PD 20 V in, XL4015 16 V laptop out, LM2596 12 V passive PoE. Board was drawn in EasyEDA Pro; fab/ is its 2026-03-25 export (Gerbers…
Main components on the Board
Board bill of materials (BOM)
235 components, 111 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | LM74700-Q1 | SOT-23-6 | U1, U2, U6, U7, U12 |
| 1 | C841384 LMR33630 12V | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U3 |
| 1 | C48112 LM3150 15.75V 4.5A | HTSSOP-14_L5.0-W4.4-P0.65-LS6.4-BL-EP | U4 |
| 1 | C841384 LMR33630 5V | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U5 |
| 2 | TLV7011 | SOT-23-5 | U10, U45 |
| 1 | C115907 LM3478 54V boost | SOIC-8_3.9x4.9mm_P1.27mm | U20 |
| 1 | C544399 TPS26600 eFuse | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm | U21 |
| 1 | LTC4279 | SOIC-16_3.9x9.9mm_P1.27mm | U22 |
| 2 | SN74AHCT1G125 | SOT-23-5 | U30, U31 |
| 1 | STM32F072CBT6 | LQFP-48_7x7mm_P0.5mm | U40 |
| 2 | INA180A1 | SOT-23-5 | U41, U42 |
| 1 | MCP6001T-I/OT | SOT-23-5 | U43 |
| 1 | CH224A | ESSOP-10_CH224A | U50 |
| 1 | AP2112K-3.3 | SOT-23-5 | U51 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U52 |
| 5 | SI4470EY | SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2, Q6, Q7, Q12 |
| 1 | AOD4185 | TO-252-2 | Q8 |
| 4 | 2N7002 | SOT-23 | Q9, Q10, Q25, Q45 |
| 2 | AO3400A | SOT-23 | Q11, Q30 |
| 1 | AO4482 | SOIC-8_3.9x4.9mm_P1.27mm | Q13 |
Show 91 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AO4482 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm | Q20 |
| 1 | PSMN075-100MSEX | LFPAK33 | Q22 |
| 1 | DMP10H400SE | SOT-223_L6.5-W3.5-P2.30-LS7.0-BR | Q23 |
| 1 | BSS123 | SOT-23 | Q24 |
| 2 | AOD4184A | TO-252-2 | Q40, Q41 |
| 1 | SI4401DDY | SOIC-8_3.9x4.9mm_P1.27mm | Q44 |
| 1 | C165948 USB-C PD in | USB-C_TYPE-C-31-M-12 | J1 |
| 1 | C22359705 DC in 18-26V, PJ-002BH 5.5x2.5 | DC-IN-TH_PJ-002BH | J2 |
| 1 | C22359705 Laptop out 15.6V, PJ-002BH 5.5x2.5 (v1 jack) | DC-IN-TH_PJ-002BH | J3 |
| 1 | C385834 RJ45 radio | RJ45-TH_R-RJ45R08P-A004 | J5 |
| 1 | C385834 RJ45 laptop | RJ45-TH_R-RJ45R08P-A004 | J6 |
| 1 | C20079 Fan 12V | CONN-TH_XH-2A | J8 |
| 1 | SWD | PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | UART | PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | C165948 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J12 |
| 1 | C2316 Lid LEDs | CONN-TH_XH-3A | J13 |
| 4 | CR123A | BAT-TH_BH-123A-A5BJ002 | BT1, BT2, BT3, BT4 |
| 1 | C2838912 2A | Fuse_1206_3216Metric | F1 |
| 1 | C13564 10k NTC | R_0603_1608Metric | RT1 |
| 1 | C231329 RESET | SW_SPST_B3U-1000P | SW1 |
| 1 | C231329 BOOT0 (DFU) | SW_SPST_B3U-1000P | SW2 |
| 1 | C148220 SMAJ22A TVS | D_SMA | D1 |
| 1 | C148227 SMAJ28A TVS | D_SMA | D2 |
| 1 | C15874 SS310 100V Schottky | D_SMA | D20 |
| 2 | 1N4148W | D_SOD-123 | D21, D40 |
| 2 | C10762 SMAJ58A TVS | D_SMA | D22, D70 |
| 2 | C12747 BZT52C12 zener | D_SOD-123 | D23, D24 |
| 1 | C965557 WS2812B-4020 power LED | LED-SMD_WS2812B-4020 | D30 |
| 1 | C965557 WS2812B-4020 radio LED | LED-SMD_WS2812B-4020 | D31 |
| 1 | C2480 SS14 flyback | D_SMA | D32 |
| 1 | C96324 S1B clamp | D_SMA | D71 |
| 2 | C2847554 MDA1040-150M 15u 6A | IND-SMD_L10.0-W10.0-APS10A40M470 | L3, L4 |
| 1 | C2687402 SRP7028A-100M 10u 3.5A | L_Bourns_SRP7028A_7.3x6.6mm | L5 |
| 1 | C2847586 MDA1365-330M 33u 9A | L_12x12mm_H8mm | L20 |
| 23 | 100N 100n | C_0805_2012Metric | C1, C2, C6, C7, C12, C13, C16, C17 +15 |
| 2 | 100N/50V 100n/50V | C_0805_2012Metric | C3, C5 |
| 1 | 47U/63V 47u/63V | CP_Elec_8x10.5 | C4 |
| 3 | 1U/50V 1u/50V | C_1206_3216Metric | C8, C61, C140 |
| 4 | 10N 10n | C_0805_2012Metric | C14, C15, C113, C135 |
| 1 | 100P 100p | C_0805_2012Metric | C20 |
| 3 | 47N 47n | C_0805_2012Metric | C21, C60, C119 |
| 1 | 10U/25V 10u/25V | C_1210_3225Metric | C22 |
| 3 | 4.7U/100V 4.7u/100V | C_1210_3225Metric | C23, C24, C26 |
| 1 | 47U/100V 47u/100V | CP_Elec_10x10.5 | C25 |
| 6 | 10U/50V 10u/50V | C_1210_3225Metric | C30, C40, C44, C50, C90, C91 |
| 3 | 220N/50V 220n/50V | C_0805_2012Metric | C31, C41, C51 |
| 4 | 1u | C_0805_2012Metric | C32, C52, C118, C134 |
| 9 | 22U/25V 22u/25V | C_1210_3225Metric | C34, C35, C36, C37, C45, C54, C55, C56 +1 |
| 1 | 4.7U/16V 4.7u/16V | C_0805_2012Metric | C42 |
| 1 | 470N/16V 470n/16V | C_0805_2012Metric | C43 |
| 1 | C2981459 220u/25V polymer | CP_Elec_6.3x7.7 | C46 |
| 1 | 2.2N 2.2n | C_0805_2012Metric | C49 |
| 2 | 1U/100V 1u/100V | C_1210_3225Metric | C62, C70 |
| 1 | 220N/100V 220n/100V | C_1210_3225Metric | C71 |
| 2 | 470U/25V 470u/25V | CP_Elec_10x10.5 | C97, C98 |
| 1 | 4.7N 4.7n | C_0805_2012Metric | C117 |
| 1 | 4.7U 4.7u | C_0805_2012Metric | C130 |
| 1 | 1u | C_0603_1608Metric | C141 |
| 2 | 10U 10u | C_0603_1608Metric | C142, C143 |
| 10 | 100K 100k | R_0805_2012Metric | R5, R6, R29, R42, R80, R89, R92, R97 +2 |
| 21 | 10K 10k | R_0805_2012Metric | R7, R9, R24, R26, R27, R46, R47, R49 +13 |
| 4 | 47K 47k | R_0805_2012Metric | R8, R21, R28, R48 |
| 2 | 20K 20k | R_0805_2012Metric | R10, R31 |
| 1 | C44883 15m 1W | R_2512_6332Metric | R20 |
| 1 | C17721 499k 1% | R_0805_2012Metric | R22 |
| 2 | 12K 12k | R_0805_2012Metric | R23, R50 |
| 2 | 1k | R_0805_2012Metric | R25, R81 |
| 1 | 220K 220k | R_0805_2012Metric | R30 |
| 1 | 2k | R_0805_2012Metric | R40 |
| 2 | 51K 51k | R_0805_2012Metric | R41, R65 |
| 1 | 820K 820k | R_0805_2012Metric | R44 |
| 1 | 750R | R_0805_2012Metric | R45 |
| 1 | 3k | R_0805_2012Metric | R51 |
| 1 | 5.6K 5.6k | R_0805_2012Metric | R60 |
| 2 | C17514 1M 1% | R_0805_2012Metric | R64, R86 |
| 1 | 10R | R_0805_2012Metric | R70 |
| 1 | 200R | R_0805_2012Metric | R71 |
| 1 | C844904 0.1R 1% 2W | R_2512_6332Metric | R72 |
| 1 | 3.3K 3.3k | R_0805_2012Metric | R73 |
| 6 | 100R | R_0805_2012Metric | R74, R75, R76, R77, R103, R106 |
| 1 | 1M | R_0805_2012Metric | R84 |
| 2 | C25476 24R 2W pulse | R_2512_6332Metric | R85, R88 |
| 1 | 150K 150k | R_0805_2012Metric | R87 |
| 2 | 33K 33k | R_0805_2012Metric | R90, R94 |
| 3 | 4.7K 4.7k | R_0805_2012Metric | R91, R95, R98 |
| 2 | C2885416 20m 1W | R_2512_6332Metric | R93, R96 |
| 1 | C25271 1R | R_0805_2012Metric | R104 |
| 1 | C17477 0R | R_0805_2012Metric | R112 |
| 1 | 220R | R_0805_2012Metric | R113 |
| 1 | C17436 120k 1% | R_0805_2012Metric | R120 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R122, R123 |
Board design files
The KiCad project lives in the Filip-Kin/frc-radio-kiosk repository on GitHub; these links point at the commit this page was built from.
Board: common questions
What microcontroller does the Board use?
The Board is built around the STM32F072CBT6, from the STM32 family.
How big is the Board?
The Board measures 84 × 141 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Board?
235 components, from 111 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Board design files?
From the Filip-Kin/frc-radio-kiosk repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Board design in my own project?
The repository has no license, so all rights stay with Filip-Kin. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in frc-radio-kiosk
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k