19 open source boards using the SN74AHCT1G125
Real designs built with the SN74AHCT1G125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Sofle Pico
josefadamcik
145.4 × 116.3 mm98 parts2LMIT2.5kRP2040/RP2350
SST80
dededecline
344.7 × 124.1 mm152 parts2LGPL-3.021RP2040/RP2350
Hardware IO 16 8 1
PPUC
100 × 100 mm217 parts2LTAPR-OHL-1.05ESP32
Lumenlab
ericmcdaniel
99.9 × 80 mm72 parts4LMIT3STM32
EC Pro2 Mainboard
4pplet
284.7 × 100 mm49 parts4LMIT3STM32
Board
Filip-Kin
84 × 141 mm235 parts2LNo license0RP2040/RP2350
Hardware IO 16x8 matrix
PPUC
97.6 × 67.3 mm202 parts2LTAPR-OHL-1.00RP2040/RP2350
Hardware Opto 16
PPUC
99.7 × 67.3 mm200 parts2LTAPR-OHL-1.00RP2040/RP2350
Hardware Out 8x10
PPUC
97.6 × 67.3 mm162 parts2LTAPR-OHL-1.00ESP32
Agentdeck
Brillar0101
150 × 110 mm119 parts2LMIT0ESP32
ARC Reactor
SuperMK15
67.9 × 70 mm41 parts4LNo license0STM32
Radio kiosk
Filip-Kin
84 × 133 mm188 parts2LNo license0STM32
ControlBoard
melair
98 × 58 mm88 parts4LNo license5STM32
Radio kiosk fixed
Filip-Kin
84 × 133 mm188 parts2LNo license0STM32
Backplane
melair
40 × 100 mm78 parts4LNo license5STM32
Widget
melair
61 × 30 mm78 parts4LNo license5STM32
Strikes
melair
54 × 35 mm24 parts2LNo license5NeedyCountdown
melair
23 × 35 mm17 parts2LNo license5Symm60HE-Daughterboard
Mokeded
50 × 31 mm36 parts2LGPL-3.02
How designs wire the SN74AHCT1G125
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the SN74AHCT1G125 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF.
- The OE pin is tied to GND on 8 of 13 designs (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OEpin 1 | Connected to: GND 62% · a signal 38% |
|
| GNDpin 3 | Connected to: GND 92% | — |
| Bpin 4 | Connected to: A connector 38% |
|
| VCCpin 5 | Connected to: 5V 92% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sofle Pico by josefadamcik, SST80 by dededecline, Backplane by melair and Hardware IO 16 8 1 by PPUC.
The SN74AHCT1G125 in open source designs
The gallery holds 19 open source boards using the SN74AHCT1G125 from 13 GitHub repositories; a typical one measures about 97.6 × 79.9 mm and carries around 98 components.
68% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.
The most starred is Sofle Pico by josefadamcik.
Parts used alongside the SN74AHCT1G125
Microcontrollers on boards using the SN74AHCT1G125
What boards using the SN74AHCT1G125 are built for
SN74AHCT1G125: common questions
Where can I find a SN74AHCT1G125 reference design?
Each of the 19 boards on this page is a real design using the SN74AHCT1G125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74AHCT1G125 VCC pin?
The VCC pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF. Counted from the KiCad layouts of 13 open source designs using the SN74AHCT1G125.
How is the SN74AHCT1G125 OE pin connected?
The OE pin is tied to GND on 8 of 13 designs (a signal on 5). Counted from the KiCad layouts of 13 open source designs using the SN74AHCT1G125.
What parts are used alongside the SN74AHCT1G125?
The AP2112K-3.3, RP2040, ADM3483, LMV321 and W25Q128JVSIQ appear in the most repositories here.
Which microcontrollers do boards using the SN74AHCT1G125 use?
Most are built on STM32 (8), RP2040/RP2350 (6) and ESP32 (3).
How big is a typical board using the SN74AHCT1G125?
The median is 97.6 × 79.9 mm, and 68% are two-layer designs.
What is the most popular open source board using the SN74AHCT1G125?
By GitHub stars, Sofle Pico by josefadamcik, with 2,546 stars.
Can I simulate one of these boards using the SN74AHCT1G125 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.