Ai plant pot
Flamebamboo·ai-plant-pot·Production/PCB/PixPlanter.kicad_pcb
About the Ai plant pot PCB
Ai plant pot is an open source ESP32 PCB design by Flamebamboo, published on GitHub. It is a 2-layer board measuring 30 × 58 mm, with 5 components from 5 distinct parts.
Its main chip is the XIAO-ESP32-S3-SMD, from the ESP32 family. Other key parts include the AM2302.
It belongs with the displays & leds, sensors and power & battery designs in this gallery.
From the project
This project is an emotive smart planter that plays an animation through its OLED screen depending on the conditions from the soil moisture, temperature & humidity sensors. It's also designed for portability with a 2000 MAH lipo battery and easy battery charging with USB type C f
This project is an emotive smart planter that plays an animation through its OLED screen depending on the conditions from the soil moisture, temperature & humidity sensors. It's also designed for portability with a 2000 MAH lipo battery and easy battery charging with USB type C from the ESP32 C6 from xiao. With this microcontroller it supports HomeKit and battery charging built it which i'm really excited about. The CAD design of this planter contains 2 seprate compartments. The inner pot and the outer pot. The inner pot has a snap fit design and drainage holes for water to safely exit…

Main components on the Ai plant pot
Ai plant pot bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AM2302 | ASAIR_AM2302_P2.54mm_Vertical | U2 |
| 1 | XIAO-ESP32-S3-SMD | XIAO-ESP32C6-SMD | U3 |
| 1 | Conn_01x02_Pin | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BatteryConnector1 |
| 1 | Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | OLED1 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | Soil_Sensor1 |
Ai plant pot design files
The KiCad project lives in the Flamebamboo/ai-plant-pot repository on GitHub; these links point at the commit this page was built from.
Ai plant pot: common questions
What microcontroller does the Ai plant pot use?
The Ai plant pot is built around the XIAO-ESP32-S3-SMD, from the ESP32 family.
How big is the Ai plant pot PCB?
The Ai plant pot measures 30 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ai plant pot?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ai plant pot design files?
From the Flamebamboo/ai-plant-pot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ai plant pot design in my own project?
The repository has no license, so all rights stay with Flamebamboo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ai plant pot without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k