Placa tesis
About the Placa tesis PCB
Placa tesis is an open source ESP8266 PCB design by FranMald, published on GitHub. It is a 2-layer board measuring 71.1 × 49.9 mm, with 46 components from 30 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the Nodemcuv_3, INA226 and LM3464AMH_NOPB. By type, the board carries 18 resistors, 10 connectors, 6 capacitors, 4 ICs, 4 transistors and 2 LEDs.
From the project
Sistema de luminarias led monitoreadas remotamente
Prueba de archivo readme sadfasdasd prueba commit
Main components on the Placa tesis
Placa tesis bill of materials (BOM)
46 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Nodemcuv_3 | DIP-30_1098_ELL | U2 |
| 1 | INA226 | VSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | LM3464AMH_NOPB | SOP65P640X110-29N | U4 |
| 1 | ESP-12E | ESP-12E | U5 |
| 4 | Q_NMOS_GDS | TO-220-3_Vertical | Q1, Q2, Q3, Q4 |
| 1 | OKI-78SR | Pin_Header_Straight_1x03_Pitch2.54mm | J1 |
| 1 | FUENTE | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | DHT11 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | COMM | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x08 | Altech_AK300_1x08_P5.00mm_45-Degree | J6 |
| 2 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J10, J12 |
| 1 | BH1750 | PinHeader_1x05_P2.54mm_Vertical | J13 |
| 1 | INA226 | PinHeader_1x08_P2.54mm_Vertical | J14 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | Battery_Cell | BatteryHolder_Keystone_103_1x20mm | BT1 |
| 1 | LED | LED_1206_3216Metric | PWR1 |
| 1 | Thermistor_NTC | Pin_Header_Angled_1x02_Pitch2.54mm | TH1 |
| 1 | DIODE | D_SMA | D5 |
| 3 | 1u | C_1206_3216Metric | C1, C2, C4 |
| 1 | 2.2n | C_1206_3216Metric | C3 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7u | C_1206_3216Metric | C9 |
| 1 | 100n | C_1206_3216Metric | C10 |
| 5 | 10k | R_1206_3216Metric | R1, R7, R13, R14, R19 |
| 2 | 4.7k | R_1206_3216Metric | R2, R26 |
| 4 | 0.2 | R_2512_6332Metric | R3, R4, R5, R6 |
| 1 | 1.5k | R_1206_3216Metric | R8 |
| 3 | R | R_1206_3216Metric | R9, R10, R27 |
| 1 | 270 | R_2816 | R12 |
| 1 | 0.001 | R_1206_3216Metric | R15 |
| 1 | 270 | R_1206_3216Metric | R24 |
Placa tesis design files
The KiCad project lives in the FranMald/Proyecto-Final-luminarias repository on GitHub; these links point at the commit this page was built from.
Placa tesis: common questions
What microcontroller does the Placa tesis use?
The Placa tesis is built around the ESP-12E, from the ESP8266 family.
How big is the Placa tesis PCB?
The Placa tesis measures 71.1 × 49.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Placa tesis?
46 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Placa tesis design files?
From the FranMald/Proyecto-Final-luminarias repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Placa tesis design in my own project?
The repository has no license, so all rights stay with FranMald. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Placa tesis without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in Proyecto-Final-luminarias
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398