Prueba placa2
About the Prueba placa2 PCB
Prueba placa2 is an open source ESP8266 PCB design by FranMald, published on GitHub. It is a 2-layer board measuring 83.4 × 99.1 mm, with 83 components from 42 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the FT230XS, Nodemcuv_3, INA226, LM3464AMH_NOPB and Ra-01-LoRa. By type, the board carries 31 resistors, 15 capacitors, 13 connectors, 8 ICs, 6 LEDs and 5 diodes.
From the project
Sistema de luminarias led monitoreadas remotamente
Prueba de archivo readme sadfasdasd prueba commit
Main components on the Prueba placa2
Prueba placa2 bill of materials (BOM)
83 components, 42 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | FT230XS | SSOP-16_3.9x4.9mm_Pitch0.635mm | U1, U9 |
| 1 | Nodemcuv_3 | DIP-30_1098_ELL | U2 |
| 1 | INA226 | VSSOP-10_3x3mm_P0.5mm | U3 |
| 2 | LM3464AMH_NOPB | SOP65P640X110-29N | U4, U8 |
| 1 | ESP-12E | ESP-12E | U5 |
| 1 | Ra-01-LoRa | Ai-Thinker-Ra-01-LoRa | U7 |
| 4 | Q_NMOS_GDS | TO-220 | Q1, Q2, Q3, Q4 |
| 1 | Conn_01x03 | Pin_Header_Straight_1x03_Pitch2.54mm | J1 |
| 2 | USB_B_Micro | USB_Micro-B_Wuerth-629105150521 | J2, J11 |
| 1 | Conn_01x02 | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 2 | Conn_01x08 | Pin_Header_Straight_1x08_Pitch2.54mm | J7, J8 |
| 2 | Conn_01x14 | Pin_Header_Straight_1x14_Pitch2.54mm | J9, J10 |
| 1 | Conn_01x06 | Pin_Header_Straight_1x06_Pitch2.54mm | J12 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J13 |
| 1 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J14 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | Battery_Cell | BatteryHolder_Keystone_103_1x20mm | BT1 |
| 3 | LED | LED_1206_3216Metric | PWR1, Rx1, Tx1 |
| 2 | LED | LED_0805_HandSoldering | Rx2, Tx2 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Thermistor_NTC | Pin_Header_Angled_1x02_Pitch2.54mm | TH1 |
| 3 | LED | TerminalBlock_Altech_AK300-2_P5.00mm | D1, D2, D4 |
| 1 | LED | TerminalBlock_Altech_AK300-2_P5.00mmnosilk | D3 |
| 1 | DIODE | D_SMA | D5 |
| 2 | 10n | C_1206 | C1, C13 |
| 3 | C | C_1206 | C2, C3, C4 |
| 4 | 47p | C_1206 | C6, C7, C14, C15 |
| 3 | 100n | C_1206 | C8, C12, C16 |
| 1 | 4.7u | C_1206_3216Metric | C9 |
| 1 | 100n | C_1206_3216Metric | C10 |
| 1 | 4.7u | C_1206 | C11 |
| 6 | R | R_1206 | R1, R2, R7, R8, R9, R27 |
| 4 | 0.2 | R_2512 | R3, R4, R5, R6 |
| 1 | R | R_1206_3216Metric | R10 |
| 4 | 27 | R_1206 | R11, R19, R28, R29 |
| 1 | 7.5m | R_2816 | R12 |
| 2 | 10K | R_1206_3216Metric | R13, R14 |
| 1 | 4.7k | R_1206 | R20 |
| 5 | 10k | R_1206 | R21, R30, R33, R34, R35 |
| 5 | 270 | R_1206 | R22, R23, R24, R31, R32 |
| 1 | .1 | R_1206 | R25 |
| 1 | 4.7k | R_1206_3216Metric | R26 |
Prueba placa2 design files
The KiCad project lives in the FranMald/Proyecto-Final-luminarias repository on GitHub; these links point at the commit this page was built from.
Prueba placa2: common questions
What microcontroller does the Prueba placa2 use?
The Prueba placa2 is built around the ESP-12E, from the ESP8266 family.
How big is the Prueba placa2 PCB?
The Prueba placa2 measures 83.4 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Prueba placa2?
83 components, from 42 distinct parts. The full bill of materials is listed on this page.
Where can I download the Prueba placa2 design files?
From the FranMald/Proyecto-Final-luminarias repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Prueba placa2 design in my own project?
The repository has no license, so all rights stay with FranMald. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Prueba placa2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in Proyecto-Final-luminarias
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398