Vertical wind turbine

Franzelfx·vertical-wind-turbine·electronics/charge-board/charge-board.kicad_pcb

Vertical wind turbine PCB layout, top view — open source ESP32 board by Franzelfx

About the Vertical wind turbine PCB

Vertical wind turbine is an open source ESP32 PCB design by Franzelfx, published on GitHub. It is a 4-layer board measuring 100 × 80 mm, with 81 components from 45 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the BQ25798 and AP63203WU. By type, the board carries 29 capacitors, 24 resistors, 11 diodes, 6 connectors, 3 ICs and 2 transistors.

It belongs with the power & battery designs in this gallery.

From the project

Design study: a 3D-printed vertical-axis wind turbine on a timber post, charging a 3S Li-ion pack. Parts, circuit and figures generated by scripts with FreeCAD, KiCad and Blender. Nothing built yet.

A small printed vertical-axis turbine on a 3 m, 80 x 80 mm timber pier, charging a 3S Li-ion pack (the usual "12 V", 9.0-12.6 V) through its own electronics in a weatherproof box.

Status: digital design only. Enclosure and drive train are modelled and pass collision checks. The schematic passes ERC, and the board is placed but not routed. No firmware. Nothing is built, and every power figure is an estimate. Requirements: plans/requirements.md. Next steps: plans/.

Vertical wind turbine, from the project README
From the project README

Main components on the Vertical wind turbine

Vertical wind turbine bill of materials (BOM)

81 components, 45 distinct parts.

QtyPartRefs
1
BQ25798
U1
1
AP63203WU
U2
1
ESP32-C3-WROOM-02
U3
1
BSS123
Q1
1
AO3400A
Q2
1
GENERATOR
J1
1
BRAKE
J2
1
PACK_NTC
J3
1
PACK
J4
1
LOAD
J5
1
USB-C
J6
1
7.5A mini blade
F1
1
5A mini blade
F2
1
SRD-12VDC-SL-C
K1
1
BOOT
SW1
6
SS510
D1, D2, D3, D4, D5, D6
1
1SMB5927B
D7
1
MMSZ5240B
D8
1
SMBJ26CA
D9
1
MMSZ5225B
D10
Show 25 more
QtyPartRefs
1
green
D11
1
2u2 8A
L1
1
4u7 2A
L2
1
100n 100V
C1
3
100n
C2, C22, C29
2
47n
C3, C4
1
4u7
C5
5
10u 35V
C6, C7, C9, C10, C11
3
100n 50V
C8, C12, C18
10
10u 25V
C13, C14, C15, C16, C17, C19, C20, C23 +2
1
1n 50V
C21
2
22u
C25, C26
1
1u
C27
3
1.8k 3W
R1, R2, R3
3
1M
R4, R6, R8
1
100k
R5
1
33k
R7
1
47k
R9
1
100R
R10
1
13.7k
R11
1
5.23k
R12
1
30.1k
R13
8
10k
R14, R15, R16, R17, R19, R20, R21, R22
1
1k
R18
2
5.1k
R23, R24

Vertical wind turbine design files

The KiCad project lives in the Franzelfx/vertical-wind-turbine repository on GitHub; these links point at the commit this page was built from.

Vertical wind turbine: common questions

What microcontroller does the Vertical wind turbine use?

The Vertical wind turbine is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Vertical wind turbine PCB?

The Vertical wind turbine measures 100 × 80 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Vertical wind turbine?

81 components, from 45 distinct parts. The full bill of materials is listed on this page.

Where can I download the Vertical wind turbine design files?

From the Franzelfx/vertical-wind-turbine repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Vertical wind turbine design in my own project?

The repository has no license, so all rights stay with Franzelfx. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Vertical wind turbine without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards