8 open source boards using the BQ25798

Real designs built with the BQ25798, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the BQ25798

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the BQ25798 connects to, and the resistors, capacitors and other passives placed on it.

  • The BTST1_4 pin has a series capacitor on 5 of 5 designs, most often 47 nF.
  • The BTST2_19 pin has a series capacitor on 5 of 5 designs, most often 47 nF.
  • The PROG_20 pin has a resistor to GND on 5 of 5 designs, most often 6.04 kΩ (then 9.31 kΩ).
  • The BAT_22 pin has a capacitor to GND on 5 of 5 designs, most often 10 µF.
VBUS_2pin 2Connected to: Signal 60% · VBUS_IN 40%
  • Capacitor to GND on 80% · 10 µF (7), 100 nF (4)
VBUS_3pin 3Connected to: Signal 60% · VBUS_IN 40%
  • Capacitor to GND on 80% · 10 µF (7), 100 nF (4)
BTST1_4pin 4Connected to: Signal 100%
  • Series capacitor on 100% · 47 nF (5)
REGN_5pin 5Connected to: Signal 100%
  • Capacitor to GND on 80% · 4.7 µF (4)
  • Series resistor on 80% · 5.24 kΩ (2), 2.2 kΩ (2), 127 kΩ (2)
D+_6pin 6Connected to: Not connected 80% · a signal 20%
D-_7pin 7Connected to: Not connected 80% · a signal 20%
VAC2_8pin 8Connected to: VBUS_IN 40% · not connected 20% · a signal 40%
  • Capacitor to GND on 40% · 10 µF (4), 100 nF (2)
VAC1_9pin 9Connected to: VBUS_IN 60% · not connected 20% · a signal 20%
  • Decoupling capacitor on 40% · 10 µF (2), 100 nF (2)
ACDRV2_10pin 10Connected to: GND 80% · not connected 20%
ACDRV1_11pin 11Connected to: GND 60% · not connected 20% · a signal 20%
QON_12pin 12Connected to: Not connected 60% · a signal 40%
SCL_14pin 14Connected to: The microcontroller 60% · not connected 20%
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
SDA_15pin 15Connected to: The microcontroller 60% · not connected 20%
  • Series resistor on 40% · 10 kΩ (1), 0 Ω (1)
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
TS_16pin 16Connected to: A connector 40% · not connected 20%
  • Resistor to GND on 80% · 30.3 kΩ (3), 10 kΩ (2), 30.1 kΩ (1)
  • Series resistor on 80% · 5.24 kΩ (2), 5.23 kΩ (1), 5.2 kΩ (1)
ILIM_HIZ_17pin 17Connected to: Signal 100%
  • Series resistor on 80% · 127 kΩ (2), 5.23 kΩ (1), 75 kΩ (1)
  • Resistor to GND on 60% · 100 kΩ (2), 160 kΩ (1)
BATP_18pin 18Connected to: Signal 100%
  • Series resistor on 60% · 100 Ω (3)
  • Pull-up to VBATT on 40% · 100 Ω (2)
BTST2_19pin 19Connected to: Signal 100%
  • Series capacitor on 100% · 47 nF (5)
PROG_20pin 20Connected to: Signal 100%
  • Resistor to GND on 100% · 6.04 kΩ (2), 9.31 kΩ (2), 13.7 kΩ (1)
INT_21pin 21Connected to: The microcontroller 40% · not connected 20%
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
BAT_22pin 22Connected to: Signal 80% · VBAT 20%
  • Capacitor to GND on 100% · 10 µF (10)
  • Series resistor on 40% · 100 Ω (2)
BAT_23pin 23Connected to: Signal 80% · VBAT 20%
  • Capacitor to GND on 100% · 10 µF (10)
  • Series resistor on 40% · 100 Ω (2)
SDRV_24pin 24Connected to: Signal 100%
  • Capacitor to GND on 60% · 1 nF (3)
SYS_25pin 25Connected to: Signal 80% · VSYS 20%
  • Capacitor to GND on 100% · 10 µF (21), 100 nF (6), 1 µF (1)
SW2_26pin 26Connected to: Signal 100%
  • Inductor on 100% · 1 µH (3), 2.2 µH (2)
  • Series capacitor on 100% · 47 nF (5)
GND_27pin 27Connected to: GND 100%
SW1_28pin 28Connected to: Signal 100%
  • Inductor on 100% · 1 µH (3), 2.2 µH (2)
  • Series capacitor on 100% · 47 nF (5)
PMID_29pin 29Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 µF (15), 100 nF (5), 33 µF (2)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BQ25798 by UWCubeSat, Vertical wind turbine by Franzelfx, 1s battery charger by stellarcorp and Flight Controller by C-yue28.

The BQ25798 in open source designs

The gallery holds 8 open source boards using the BQ25798 from 7 GitHub repositories; a typical one measures about 78.8 × 60.5 mm and carries around 71 components.

75% use four copper layers or more, and 50% carry an open source license.

The most starred is Rural connectivity by embeddedos-org.

Microcontrollers on boards using the BQ25798

What boards using the BQ25798 are built for

BQ25798: common questions

Where can I find a BQ25798 reference design?

Each of the 8 boards on this page is a real design using the BQ25798. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the BQ25798 BTST1_4 pin connected?

The BTST1_4 pin has a series capacitor on 5 of 5 designs, most often 47 nF. Counted from the KiCad layouts of 5 open source designs using the BQ25798.

How is the BQ25798 BTST2_19 pin connected?

The BTST2_19 pin has a series capacitor on 5 of 5 designs, most often 47 nF. Counted from the KiCad layouts of 5 open source designs using the BQ25798.

What resistor goes on the BQ25798 PROG_20 pin?

The PROG_20 pin has a resistor to GND on 5 of 5 designs, most often 6.04 kΩ (then 9.31 kΩ). Counted from the KiCad layouts of 5 open source designs using the BQ25798.

Which microcontrollers do boards using the BQ25798 use?

Most are built on ESP32 (2), STM32 (2) and WCH CH32/CH55x (1).

How big is a typical board using the BQ25798?

The median is 78.8 × 60.5 mm, and 25% are two-layer designs.

What is the most popular open source board using the BQ25798?

By GitHub stars, Rural connectivity by embeddedos-org, with 8 stars.

Can I simulate one of these boards using the BQ25798 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part