HardLabs

Rl fc f405.routed

GabuGravin41·rlpcb·examples/drone_fc/output/rl_fc_f405/rl_fc_f405.routed.kicad_pcb

Rl fc f405.routed PCB layout, top view — open source STM32 board by GabuGravin41

About the Rl fc f405.routed PCB

Rl fc f405.routed is an open source STM32 PCB design by GabuGravin41, published on GitHub under the MIT license. It is a 4-layer board measuring 36 × 36 mm, with 60 components from 35 distinct parts.

Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the TPS5430, AP2112K-3.3, ICM-20602, BMP280 and W25Q128JV. By type, the board carries 26 capacitors, 12 resistors, 7 ICs, 5 connectors, 5 diodes and 3 inductors.

It belongs with the power & battery, sensors and robotics & motion designs in this gallery.

From the project

This is what a new project looks like with RL PCB. Every step below is a real tool call. designsession.py and boardsession.py are the exact sequence the copilot runs, so you can replay it.

This is what a new project looks like with RL PCB. Every step below is a real tool call. designsession.py and boardsession.py are the exact sequence the copilot runs, so you can replay it.

Brief: a 5-inch-quad flight controller, 36×36 mm, 30.5 mm M3 mounting, 2–6S LiPo input, Betaflight-style pinout.

1. Draw the wires. RL PCB never draws them. Follow the wiring guide, then say "verify". 2. Press F8 (Update PCB from Schematic). In the cloud demo, makeboard.py stands in for F8. 3. Route the critical nets by hand before autorouting: the buck hot loop (C1–U1–D1), the switch node, USB D+/D−, and…

Rl fc f405.routed, from the project README
From the project README

Main components on the Rl fc f405.routed

TPS5430AP2112K-3.3STM32F405RGT6ICM-20602BMP280W25Q128JVUSBLC6-2SC6

Rl fc f405.routed bill of materials (BOM)

60 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS5430
U1
1
AP2112K-3.3
U2
1
STM32F405RGT6
U3
1
ICM-20602
U4
1
BMP280
U5
1
W25Q128JV
U6
1
USBLC6-2SC6
U7
1
8MHZ
8MHz
Y1
1
C3020560
USB-C
J2
1
C160407
ESC
J3
1
C160404
RX
J4
1
C160404
VTX
J5
1
SWD
J6
1
C2886898
BOOT
SW1
1
B340A
D1
1
SMAJ28A
D2
1
C2288
blue
D3
1
C12624
green
D4
1
SS34
D5
2
C1002
600R@100MHz
FB1, FB2
Show 15 more
QtyPartRefs
1
15U
15u
L1
2
C13585
10u 50V
C1, C2
1
10N
10n
C3
2
C45783
22u 10V
C4, C5
2
1u
C6, C17
2
4.7U
4.7u
C7, C14
12
100N
100n
C8, C10, C11, C12, C13, C18, C21, C22 +4
3
2.2U
2.2u
C15, C16, C25
2
18P
18p
C19, C20
1
9.31K
9.31k
R1
1
3.01K
3.01k
R2
3
10K
10k
R3, R5, R10
3
1k
R4, R6, R7
2
4.7K
4.7k
R8, R9
2
5.1K
5.1k
R11, R12

Rl fc f405.routed design files

The KiCad project lives in the GabuGravin41/rlpcb repository on GitHub; these links point at the commit this page was built from.

Rl fc f405.routed: common questions

What microcontroller does the Rl fc f405.routed use?

The Rl fc f405.routed is built around the STM32F405RGT6, from the STM32 family.

How big is the Rl fc f405.routed PCB?

The Rl fc f405.routed measures 36 × 36 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Rl fc f405.routed?

60 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rl fc f405.routed design files?

From the GabuGravin41/rlpcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Rl fc f405.routed design in my own project?

Yes, under the terms of its MIT license, which GabuGravin41 chose for the repository.

Can I test firmware for the Rl fc f405.routed without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in rlpcb

Similar boards