5 open source boards using the TPS5430
Real designs built with the TPS5430, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Split flap fae
codingcatgirl
40 × 80 mm39 parts2LApache-2.030ESP32
Esp32lcd
cjheath
78 × 44 mm30 parts2LNo license3STM32
Rl fc f405.placed
GabuGravin41
36 × 36 mm60 parts4LNo license0STM32
Rl fc f405.placed
GabuGravin41
36 × 36 mm60 parts4LMIT0STM32
Rl fc f405.routed
GabuGravin41
36 × 36 mm60 parts4LMIT0
The TPS5430 in open source designs
The gallery holds 5 open source boards using the TPS5430 from 4 GitHub repositories; a typical one measures about 36 × 36 mm and carries around 60 components.
60% use four copper layers or more, and 60% carry an open source license.
The most starred is Split flap fae pcb by codingcatgirl.
Parts used alongside the TPS5430
What boards using the TPS5430 are built for
TPS5430: common questions
Where can I find a TPS5430 reference design?
Each of the 5 boards on this page is a real design using the TPS5430. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPS5430?
The AP2112K-3.3, BMP280, ICM-20602, STM32F405RGT6 and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the TPS5430 use?
Most are built on STM32 (3), ESP32 (1) and ESP8266 (1).
How big is a typical board using the TPS5430?
The median is 36 × 36 mm, and 40% are two-layer designs.
What is the most popular open source board using the TPS5430?
By GitHub stars, Split flap fae pcb by codingcatgirl, with 30 stars.
Can I simulate one of these boards using the TPS5430 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.