16 open source boards using the W25Q128JV
Real designs built with the W25Q128JV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
PicoStation3D
Wren6991
100 × 50 mm74 parts4LCC0-1.050RP2040/RP2350
FC V5d Pro Rev1
proveskit
88 × 94.5 mm255 parts4LCERN-OHL-W-2.06RP2040/RP2350
2040Inverter
Kirg5
86.4 × 61.9 mm93 parts4LNo license1RP2040/RP2350
IjrX1Core
OpenNoorIlm
320 × 255 mm246 parts4LMIT0STM32
Rl fc f405.placed
GabuGravin41
36 × 36 mm60 parts4LMIT0STM32
Rl fc f405.placed
GabuGravin41
36 × 36 mm60 parts4LNo license0- schematic only · 6 partsSTM32
Nvidia
Lokesh-Tech09
6 partsNo license0 RP2040/RP2350
Mico
Mentra-Community
30.5 × 138 mm61 parts2LMIT1.2kSTM32
Fpga stm32-ifaces
azonenberg
90 × 94.5 mm267 parts6LBSD-3-Clause17RP2040/RP2350
FC V5e Production Rev1
proveskit
88 × 94.5 mm244 parts4LCERN-OHL-W-2.06STM32
Rl fc f405.routed
GabuGravin41
36 × 36 mm60 parts4LMIT0RP2040/RP2350
Msa
Mentra-Community
47.8 × 9.4 mm53 parts2LMIT1.2kRP2040/RP2350
FC V5d Production Rev2
proveskit
88 × 94.5 mm243 parts4LCERN-OHL-W-2.06RP2040/RP2350
FC V5e
proveskit
88 × 94.5 mm242 parts4LCERN-OHL-W-2.06RP2040/RP2350
FC Board v3
proveskit
100 × 100 mm73 parts4LCERN-OHL-W-2.06RP2040/RP2350
FiberPhantom — Covert Fiber Optic Network Tap & MITM Implant
jayis1
82 × 34 mm17 parts4LNo license3
How designs wire the W25Q128JV
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the W25Q128JV connects to, and the resistors, capacitors and other passives placed on it.
- The CS# pin has a pull-up to 3.3V on 6 of 8 designs, most often 10 kΩ (then 4.7 kΩ).
- The VCC pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 10 µF).
- The CS# pin has a series resistor on 5 of 8 designs, most often 1 kΩ (then 2.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CS#pin 1 | Connected to: The microcontroller 75% |
|
| GNDpin 4 | Connected to: GND 88% | — |
| VCCpin 8 | Connected to: 3.3V 88% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mico by Mentra-Community, PicoStation3D by Wren6991, Fpga stm32-ifaces by azonenberg and FC Board v3 by proveskit.
The W25Q128JV in open source designs
The gallery holds 16 open source boards using the W25Q128JV from 10 GitHub repositories; a typical one measures about 88 × 94.5 mm and carries around 74 components.
87% use four copper layers or more, and 75% carry an open source license.
The most starred is Mico by Mentra-Community.
Parts used alongside the W25Q128JV
Microcontrollers on boards using the W25Q128JV
What boards using the W25Q128JV are built for
W25Q128JV: common questions
Where can I find a W25Q128JV reference design?
Each of the 16 boards on this page is a real design using the W25Q128JV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the W25Q128JV CS# pin?
The CS# pin has a pull-up to 3.3V on 6 of 8 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 8 open source designs using the W25Q128JV.
What decoupling capacitors do designs use on the W25Q128JV VCC pin?
The VCC pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the W25Q128JV.
What parts are used alongside the W25Q128JV?
The RP2040, AP2112K-3.3, USBLC6-2SC6, BMP280 and ICM-20602 appear in the most repositories here.
Which microcontrollers do boards using the W25Q128JV use?
Most are built on RP2040/RP2350 (11) and STM32 (5).
How big is a typical board using the W25Q128JV?
The median is 88 × 94.5 mm, and 13% are two-layer designs.
What is the most popular open source board using the W25Q128JV?
By GitHub stars, Mico by Mentra-Community, with 1,235 stars.
Can I simulate one of these boards using the W25Q128JV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.