BPI-AddOn
About the BPI-AddOn PCB
BPI-AddOn is an open source PCB design by GBert, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 94 components from 72 distinct parts.
Other key parts include the MC34063 and FT230XS. By type, the board carries 38 connectors, 25 resistors, 9 capacitors, 5 diodes, 4 transistors and 2 ICs.
From the project
miscellaneous stuff / unsorted
Main components on the BPI-AddOn
BPI-AddOn bill of materials (BOM)
94 components, 72 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MC34063 | so-8 | U1 |
| 1 | FT230XS | ssop-16 | U2 |
| 4 | BS170 | to92_3_flat | Q1, Q2, Q3, Q4 |
| 1 | BARREL_JACK | dc_socket | CON1 |
| 3 | RJ45 | megb8-8 | J1, J2, J3 |
| 1 | Grove | grove-straight | J4 |
| 1 | JST ZH | B4B-ZR | J5 |
| 1 | DIN10-1 | minidin-10 | P1 |
| 1 | DIN10-2 | minidin-10 | P2 |
| 1 | DIN10-3 | minidin-10 | P3 |
| 1 | DIN10-4 | minidin-10 | P4 |
| 1 | DIN10-5 | minidin-10 | P5 |
| 1 | DIN7-1 | minidin-7 | P6 |
| 1 | DIN7-2 | minidin-7 | P7 |
| 1 | DIN7-3 | minidin-7 | P8 |
| 4 | CONN_01X03 | Pin_Header_Straight_1x03 | P9, P10, P26, P28 |
| 3 | CONN_01X05 | Pin_Header_Straight_1x05 | P11, P17, P18 |
| 1 | CONN_01X05 | pt_1,5-5-3,5-h | P12 |
| 1 | CONN_01X08 | Pin_Header_Straight_1x08 | P13 |
| 1 | CONN_02X11 | Pin_Header_Straight_2x11 | P14 |
Show 52 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_02X11 | ftsh-2211-01-l-dv | P15 |
| 1 | USB_B | conn_usb_B | P16 |
| 1 | V | Pin_Header_Straight_1x03 | P19 |
| 1 | - + | pt_1,5-2-3,5-h | P20 |
| 1 | USB_OTG | conn_usb_B_mini_smd | P21 |
| 1 | CONN_01X06 | Pin_Header_Straight_1x06 | P22 |
| 1 | CONN_01X06 | pt_1,5-6-3,5-h | P23 |
| 1 | CONN_02X02 | Pin_Header_Straight_2x02 | P24 |
| 2 | CONN_01X02 | Pin_Header_Straight_1x02 | P25, P32 |
| 3 | CONN_01X04 | Pin_Header_Straight_1x04 | P27, P30, P31 |
| 1 | CONN_01X01 | Pin_Header_Straight_1x01 | P29 |
| 1 | DCDC-Conevrter | DCDC-duo | DCDC1 |
| 1 | abortedge | abortedge | E05 |
| 2 | Polyfuse | cnp_6mm_disc | F1, F2 |
| 1 | Ferrit | R_0805_HandSoldering | Fe1 |
| 1 | Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 4 | 1pin | 1pin | REF1, REF2, REF3, REF4 |
| 1 | D_Schottky | Diode_DO-35_SOD27_Horizontal_RM10 | D1 |
| 1 | TxD | LED_0805 | D2 |
| 1 | RxD | LED_0805 | D3 |
| 2 | LED | LED-5MM | D4, D5 |
| 1 | 68uH | Neosid_Inductor_Sd14 | L1 |
| 1 | 100NF 680pF | cnp_3mm_disc | C1 |
| 1 | 100uF | CP_5x11mm | C2 |
| 1 | 18PF 100uF | CP_5x11mm | C3 |
| 1 | 18PF 10nF | R_0805_HandSoldering | C4 |
| 1 | 10UF 100nF | R_0805_HandSoldering | C5 |
| 1 | 100NF 47pF | R_0805_HandSoldering | C6 |
| 1 | 47pF | R_0805_HandSoldering | C7 |
| 1 | 100NF 4.7uF | R_0805_HandSoldering | C8 |
| 1 | 100NF 100nF | R_0805_HandSoldering | C9 |
| 1 | 10K 0 | R_0805_HandSoldering | R1 |
| 1 | 680 120 | R_1206_HandSoldering | R2 |
| 1 | 680 120 | RC05 | R3 |
| 1 | 4K7 R | RC03 | R4 |
| 1 | 680 R | RC03 | R5 |
| 1 | 3K3 1k | RC03 | R6 |
| 1 | 3K3 11k | RC03 | R7 |
| 1 | 27 | R_0805_HandSoldering | R8 |
| 1 | 3K3 27 | R_0805_HandSoldering | R9 |
| 1 | 3K3 220 | R_0805_HandSoldering | R10 |
| 1 | 120 220 | R_0805_HandSoldering | R11 |
| 1 | 270 0 | R_0805_HandSoldering | R12 |
| 1 | 8k2 | RC03 | R13 |
| 1 | 3K3 10k | RC05 | R14 |
| 2 | 3K3 4k7 | R_0805_HandSoldering | R15, R22 |
| 1 | 270 4k7 | R_0805_HandSoldering | R16 |
| 4 | 49.9 4k7 | R_0805_HandSoldering | R17, R18, R19, R20 |
| 1 | 120 4k7 | R_0805_HandSoldering | R21 |
| 1 | 3K3 R | RC03 | R23 |
| 1 | 1K5 R | RC03 | R24 |
| 1 | 47K R | RC03 | R25 |
BPI-AddOn design files
The KiCad project lives in the GBert/misc repository on GitHub; these links point at the commit this page was built from.
BPI-AddOn: common questions
How big is the BPI-AddOn PCB?
The BPI-AddOn measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BPI-AddOn?
94 components, from 72 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BPI-AddOn design files?
From the GBert/misc repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the BPI-AddOn design in my own project?
The repository has no license, so all rights stay with GBert. Use it as a reference, and ask the author before reusing the design.
More boards in misc
PICCANBuster
100 × 100 mm177 parts2LNo license99
PICAll in One Railroad Interface
85 × 56.5 mm151 parts2LNo license99
PICBPi-CAN
100 × 100 mm146 parts2LNo license99
PICMfx link2
50 × 50 mm61 parts2LNo license99
PICDsPIC33-Arduino
68.6 × 53.3 mm60 parts2LNo license99
PICSmallest Rocrail Server Ever II
82 × 72 mm58 parts2LNo license99
PICMfx link
50 × 50 mm53 parts2LNo license99
RPi-MCP2515
65 × 56.5 mm42 parts2LNo license99
PICRPi-MCP2517
65 × 56.5 mm35 parts2LNo license99
PICRPi-Rail
65 × 56.5 mm35 parts2LNo license99
Booster-Link
50 × 50 mm28 parts2LNo license99