DsPIC33-Arduino
About the DsPIC33-Arduino PCB
DsPIC33-Arduino is an open source PIC PCB design by GBert, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 60 components from 51 distinct parts.
Its main chip is the SN65HVD230, from the PIC family. Other key parts include the FT230XS, LM1117 3V3, PIC18F25K80 and 7805. By type, the board carries 18 connectors, 15 capacitors, 12 resistors, 6 diodes, 5 ICs and 1 crystal.
From the project
miscellaneous stuff / unsorted
Main components on the DsPIC33-Arduino
DsPIC33-Arduino bill of materials (BOM)
60 components, 51 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT230XS | ssop-16 | U1 |
| 1 | LM1117 3V3 | SOT-223 | U2 |
| 1 | SN65HVD230 dsPIC33EVxxxGM102-I/SP | dil_28-300_socket | U3 |
| 1 | PIC18F25K80 74LVC1G32 | SOT-353 | U4 |
| 1 | 7805 | TO-252-2Lead | U5 |
| 1 | 16MHZ Crystal | crystal_hc-49s | Y1 |
| 1 | BARREL_JACK | BARREL_JACK | CON1 |
| 1 | Power | Socket_Strip_Arduino_1x08 | P1 |
| 1 | Analog | Socket_Strip_Arduino_1x06 | P2 |
| 1 | Digital | Socket_Strip_Arduino_1x10 | P3 |
| 1 | Digital | Socket_Strip_Arduino_1x08 | P4 |
| 4 | CONN_1 | Arduino_1pin | P5, P6, P7, P8 |
| 1 | USB_B | USB_B | P9 |
| 1 | PIN20 | Pin_Header_Straight_1x03 | P10 |
| 1 | PIN5 | Pin_Header_Straight_1x03 | P11 |
| 1 | PWR_IN | Pin_Header_Straight_1x03 | P12 |
| 1 | PIN2 | Pin_Header_Straight_1x02 | P13 |
| 1 | Power Select | Pin_Header_Straight_1x03 | P14 |
| 1 | I2C | s4b-ph-kl | P15 |
| 1 | PIN19 | Pin_Header_Straight_1x03 | P16 |
Show 31 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | UART | s4b-ph-kl | P17 |
| 1 | Ferrit | R_0805_HandSoldering | F1 |
| 1 | ICSP | ICSP | JP1 |
| 1 | SW_PUSH | PCB_PUSH | SW1 |
| 1 | RX LED | LED_0805 | D1 |
| 1 | TX LED | LED_0805 | D2 |
| 1 | Power LED | LED-3MM | D3 |
| 2 | BAT43 | diode_do35 | D4, D6 |
| 1 | LED | LED-3MM | D5 |
| 2 | 100NF 100nF | C_0805_HandSoldering | C1, C6 |
| 1 | 4,7uF | C_0805_HandSoldering | C2 |
| 1 | 18PF 10nF | C_0805_HandSoldering | C3 |
| 1 | 18PF 47pF | C_0805_HandSoldering | C4 |
| 1 | 10UF 47pF | C_0805_HandSoldering | C5 |
| 2 | 47uF | CP_4x5mm | C7, C15 |
| 3 | 100NF 100nF | C_Disc_D3_P2.5 | C8, C9, C10 |
| 1 | 100NF 10uF ESR | CP_4x5mm | C11 |
| 2 | 100NF 22pF | C_Disc_D3_P2.5 | C12, C13 |
| 1 | 100NF 47uF | CP_4x5mm | C14 |
| 1 | 10K 27 | R_0805_HandSoldering | R1 |
| 1 | 680 27 | R_0805_HandSoldering | R2 |
| 1 | 680 270 | R_0805_HandSoldering | R3 |
| 1 | 4K7 270 | R_0805_HandSoldering | R4 |
| 1 | 680 1k5 | RC03 | R5 |
| 1 | 3K3 470 | RC03 | R6 |
| 1 | 3K3 4k7 | RC03 | R7 |
| 1 | 4k7 | R_0805_HandSoldering | R8 |
| 1 | 3K3 1k5 | RC03 | R9 |
| 1 | 3K3 0 | R_0805_HandSoldering | R10 |
| 1 | 120 3k3 | RC03 | R11 |
| 1 | 270 3k3 | RC03 | R12 |
DsPIC33-Arduino design files
The KiCad project lives in the GBert/misc repository on GitHub; these links point at the commit this page was built from.
DsPIC33-Arduino: common questions
What microcontroller does the DsPIC33-Arduino use?
The DsPIC33-Arduino is built around the SN65HVD230, from the PIC family.
How big is the DsPIC33-Arduino PCB?
The DsPIC33-Arduino measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DsPIC33-Arduino?
60 components, from 51 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DsPIC33-Arduino design files?
From the GBert/misc repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the DsPIC33-Arduino design in my own project?
The repository has no license, so all rights stay with GBert. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DsPIC33-Arduino without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in misc
PICCANBuster
100 × 100 mm177 parts2LNo license99
PICAll in One Railroad Interface
85 × 56.5 mm151 parts2LNo license99
PICBPi-CAN
100 × 100 mm146 parts2LNo license99
BPI-AddOn
100 × 100 mm94 parts2LNo license99
PICMfx link2
50 × 50 mm61 parts2LNo license99
PICSmallest Rocrail Server Ever II
82 × 72 mm58 parts2LNo license99
PICMfx link
50 × 50 mm53 parts2LNo license99
RPi-MCP2515
65 × 56.5 mm42 parts2LNo license99
PICRPi-MCP2517
65 × 56.5 mm35 parts2LNo license99
PICRPi-Rail
65 × 56.5 mm35 parts2LNo license99
Booster-Link
50 × 50 mm28 parts2LNo license99
Similar boards
PICPslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7k
PICMicro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414
PICGB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0376
PICGB-MBCTEST
51.4 × 61 mm32 parts2LCC-BY-4.0376
PICGB-BENCH-G1
100 × 100 mm98 parts4LCC-BY-4.0376
PICGB-LIVE32
51.4 × 61 mm46 parts4LCC-BY-4.0376