Retro stack via
About the Retro stack via PCB
Retro stack via is an open source PCB design by gcoonrod, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 99.1 × 99.1 mm, with 13 components from 11 distinct parts.
Other key parts include the ATF16V8B-15PU and W65C22SxP. By type, the board carries 5 capacitors, 3 connectors, 2 ICs, 1 jumper, 1 diode and 1 resistor.
It belongs with the retro computing designs in this gallery.
From the project
A retro computer project based on stackable PCB boards.
The RetroStack project currently includes the following boards based on a common template:
- Power Supply & 555 Clock - W65C02S CPU & High Speed Clock - SRAM & ROM - Arduino Mega Debug Shield - Debug & Status Display
Main components on the Retro stack via
Retro stack via bill of materials (BOM)
13 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATF16V8B-15PU | DIP-20_W7.62mm_Socket_LongPads | U1 |
| 1 | W65C22SxP | DIP-40_W15.24mm_Socket_LongPads | U2 |
| 1 | BUS_6502 | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | TRM_PWR | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2 |
| 1 | HDR_IO_PORT | IDC-Header_2x13_P2.54mm_Vertical | J3 |
| 1 | JMP_PLDCK | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LED_PWR | LED_D5.0mm | D1 |
| 2 | 1u | C_Rect_L4.0mm_W2.5mm_P2.50mm | C1, C3 |
| 2 | 0u1 | C_Rect_L4.0mm_W2.5mm_P2.50mm | C2, C4 |
| 1 | 10u | CP_Radial_D5.0mm_P2.50mm | C5 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
Retro stack via design files
The KiCad project lives in the gcoonrod/retro-stack repository on GitHub; these links point at the commit this page was built from.
Retro stack via: common questions
How big is the Retro stack via PCB?
The Retro stack via measures 99.1 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Retro stack via?
13 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Retro stack via design files?
From the gcoonrod/retro-stack repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Retro stack via design in my own project?
Yes, under the terms of its Apache-2.0 license, which gcoonrod chose for the repository.
More boards in retro-stack
6502-min sbc
100 × 100 mm48 parts4LApache-2.00
Retro stack power clock
99.1 × 99.1 mm48 parts2LApache-2.00
Retro stack debug
99.1 × 99.1 mm35 parts2LApache-2.00
AVR/ArduinoPld test
81.5 × 76.2 mm33 parts2LApache-2.00
Retro stack ram rom
99.1 × 99.1 mm20 parts2LApache-2.00
Retro stack cpu
99.1 × 99.1 mm18 parts2LApache-2.00
AVR/ArduinoBasic nano acia
17.8 × 36.6 mm16 parts4LApache-2.00
Retro stack debug arduino mega shield
90.2 × 53.3 mm9 parts2LApache-2.00
Retro stack template
99.1 × 99.1 mm4 parts2LApache-2.00
Similar boards
Amiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0k
Atari pickup
26.4 × 53.9 mm7 parts2LGPL-3.01.0k
Deniseadapter
26.7 × 62.2 mm16 parts2LGPL-3.01.0k
Analog
53.9 × 23.2 mm33 parts2LGPL-3.01.0k
Rgb to hdmi
77 × 97 mm67 parts2LGPL-3.01.0k
Buffer
53.9 × 23.2 mm13 parts2LGPL-3.01.0k