Basic nano acia
About the Basic nano acia PCB
Basic nano acia is an open source AVR/Arduino PCB design by gcoonrod, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 17.8 × 36.6 mm, with 16 components from 8 distinct parts.
Its main chip is the ATmega328P-A, from the AVR/Arduino family. Other key parts include the W65C51NxP. By type, the board carries 7 capacitors, 2 ICs, 1 crystal, 1 connector and 1 resistor.
It belongs with the retro computing designs in this gallery.
From the project
A retro computer project based on stackable PCB boards.
A semi-compatible DIP-28 clone of the 6551 ACIA.
Main components on the Basic nano acia
Basic nano acia bill of materials (BOM)
16 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | W65C51NxP | DIP-28_W15.24mm | U1 |
| 1 | ATmega328P-A | TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | X322516MLB4SI | Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm | Y1 |
| 1 | ISP | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 4 | ToolingHole | ToolingHole_JLCPCB | H1, H2, H3, H4 |
| 5 | 100n | C_0402_1005Metric | C1, C2, C3, C4, C7 |
| 2 | 18p | C_0402_1005Metric | C5, C6 |
| 1 | 1k | R_0402_1005Metric | R1 |
Basic nano acia design files
The KiCad project lives in the gcoonrod/retro-stack repository on GitHub; these links point at the commit this page was built from.
Basic nano acia: common questions
What microcontroller does the Basic nano acia use?
The Basic nano acia is built around the ATmega328P-A, from the AVR/Arduino family.
How big is the Basic nano acia PCB?
The Basic nano acia measures 17.8 × 36.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Basic nano acia?
16 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Basic nano acia design files?
From the gcoonrod/retro-stack repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Basic nano acia design in my own project?
Yes, under the terms of its Apache-2.0 license, which gcoonrod chose for the repository.
Can I test firmware for the Basic nano acia without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in retro-stack
6502-min sbc
100 × 100 mm48 parts4LApache-2.00
Retro stack power clock
99.1 × 99.1 mm48 parts2LApache-2.00
Retro stack debug
99.1 × 99.1 mm35 parts2LApache-2.00
AVR/ArduinoPld test
81.5 × 76.2 mm33 parts2LApache-2.00
Retro stack ram rom
99.1 × 99.1 mm20 parts2LApache-2.00
Retro stack cpu
99.1 × 99.1 mm18 parts2LApache-2.00
Retro stack via
99.1 × 99.1 mm13 parts2LApache-2.00
Retro stack debug arduino mega shield
90.2 × 53.3 mm9 parts2LApache-2.00
Retro stack template
99.1 × 99.1 mm4 parts2LApache-2.00
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746