14 open source boards using the ATF16V8B-15PU
Real designs built with the ATF16V8B-15PU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Deck65
and3rson
254 × 80 mm183 parts2LGPL-3.015TI-CUBE-CPU
VE7PMC
99.7 × 99.7 mm43 parts4LGPL-3.010- schematic only · 51 parts
ECEN5613 Final Project
TravisNagle
51 partsNo license0 ESP32
NextTRS
apuder
145.7 × 107.8 mm93 parts2LGPL-3.074TI-CUBE-FMSound
VE7PMC
99.7 × 99.7 mm38 parts4LGPL-3.010TRS-IO-M3
apuder
134 × 74.2 mm40 parts2LGPL-3.074TI-CUBE-Serial-Interface
VE7PMC
99.7 × 99.7 mm31 parts4LGPL-3.010TRS-IO-M1
apuder
118.8 × 94 mm36 parts2LGPL-3.074AVR/Arduino
Pld test
gcoonrod
81.5 × 76.2 mm33 parts2LApache-2.00ESP32
TRSIO
apuder
93.3 × 80.6 mm33 parts2LGPL-3.074TI-CUBE-Protoboard
VE7PMC
99.7 × 99.7 mm19 parts4LGPL-3.010Retro stack ram rom
gcoonrod
99.1 × 99.1 mm20 parts2LApache-2.00TI-CUBE-Memory
VE7PMC
99.7 × 99.7 mm17 parts4LGPL-3.010Retro stack via
gcoonrod
99.1 × 99.1 mm13 parts2LApache-2.00
The ATF16V8B-15PU in open source designs
The gallery holds 14 open source boards using the ATF16V8B-15PU from 5 GitHub repositories; a typical one measures about 99.7 × 99.1 mm and carries around 35 components.
62% are two-layer designs, the rest use four layers or more, and 93% carry an open source license.
The most starred is NextTRS by apuder.
Microcontrollers on boards using the ATF16V8B-15PU
What boards using the ATF16V8B-15PU are built for
ATF16V8B-15PU: common questions
Where can I find a ATF16V8B-15PU reference design?
Each of the 14 boards on this page is a real design using the ATF16V8B-15PU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATF16V8B-15PU use?
Most are built on ESP32 (2), AVR/Arduino (1) and ESP8266 (1).
How big is a typical board using the ATF16V8B-15PU?
The median is 99.7 × 99.1 mm, and 62% are two-layer designs.
What is the most popular open source board using the ATF16V8B-15PU?
By GitHub stars, NextTRS by apuder, with 74 stars.
Can I simulate one of these boards using the ATF16V8B-15PU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.