15 open source boards using the W65C22SxP
Real designs built with the W65C22SxP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Vectron handheld
nickbild
273.1 × 221 mm42 parts2LNo license1065c816-pcbs
erikarn
306.6 × 168.1 mm66 parts4LNo license26502
justjoheinz
128.9 × 81.3 mm24 parts2LNo license2RP2040/RP2350
All in one smc
nojan1
161.1 × 82.9 mm146 parts4LNo license0W65C816S-computer
piotrmski
188 × 79.8 mm49 parts2LNo license06502-min sbc
gcoonrod
100 × 100 mm48 parts4LApache-2.006502-sbc
davidday99
96.5 × 96.6 mm47 parts4LNo license0Raspberry Pi
Clementina hardware
fran150
172.7 × 108.6 mm42 parts2LGPL-3.006502-SBC-V1.3
UraniumNutt
152.4 × 76.2 mm41 parts2LNo license0PIC
6502-Retro IO Card
linuxplayground
100 × 47.4 mm20 parts4LNo license0LCD IRQ
Synthron
83.3 × 68.2 mm21 parts4LNo license2Io card
nojan1
230 × 100 mm61 parts2LNo license0Retro stack via
gcoonrod
99.1 × 99.1 mm13 parts2LApache-2.00Lcd interface
nojan1
140.2 × 81.3 mm16 parts2LNo license0VIAs
Synthron
83.3 × 68.2 mm10 parts4LNo license2
How designs wire the W65C22SxP
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the W65C22SxP connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF.
- The RES pin has a pull-up to 5V on 4 of 10 designs, most often 1 kΩ (then 3.3 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 1 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: 5V 82% · a signal 18% |
|
| RESpin 34 | Connected to: A connector 50%, W65C02SxP 30%, W65C02SXP 20% |
|
37 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vectron handheld by nickbild, 65c816-pcbs by erikarn, 6502 by justjoheinz and LCD IRQ by Synthron.
The W65C22SxP in open source designs
The gallery holds 15 open source boards using the W65C22SxP from 11 GitHub repositories; a typical one measures about 140.2 × 82.8 mm and carries around 42 components.
53% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Vectron handheld by nickbild.
Parts used alongside the W65C22SxP
Microcontrollers on boards using the W65C22SxP
What boards using the W65C22SxP are built for
W65C22SxP: common questions
Where can I find a W65C22SxP reference design?
Each of the 15 boards on this page is a real design using the W65C22SxP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the W65C22SxP VCC pin?
The VCC pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF. Counted from the KiCad layouts of 11 open source designs using the W65C22SxP.
What pull-up resistor is used on the W65C22SxP RES pin?
The RES pin has a pull-up to 5V on 4 of 10 designs, most often 1 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 11 open source designs using the W65C22SxP.
What parts are used alongside the W65C22SxP?
The W65C02SxP, 28C256, AS6C4008-55PCN, W65C51NxP and 74HC00 appear in the most repositories here.
Which microcontrollers do boards using the W65C22SxP use?
Most are built on PIC (1), Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the W65C22SxP?
The median is 140.2 × 82.8 mm, and 53% are two-layer designs.
What is the most popular open source board using the W65C22SxP?
By GitHub stars, Vectron handheld by nickbild, with 10 stars.
Can I simulate one of these boards using the W65C22SxP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.