MM Control

giang-hoangnguyen·MM_Control·hardware/MM_Control.kicad_pcb

MM Control PCB layout, top view — open source STM32 board by giang-hoangnguyen

About the MM Control PCB

MM Control is an open source STM32 PCB design by giang-hoangnguyen, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 107 components from 47 distinct parts.

Its main chip is the STM32F407VETx, from the STM32 family. Other key parts include the LED, DRV8872DDA, AMS1117-3.3, TMC2209_SILENTSTEPSTICK and TPS5430DDA. By type, the board carries 39 capacitors, 24 resistors, 18 connectors, 12 ICs, 8 LEDs and 2 switches.

It belongs with the robotics & motion designs in this gallery.

From the project

Board điều khiển chuyển động dùng STM32F407VET6, 100 × 100 mm, 2 lớp. Một board gồm 4 kênh động cơ DC (DRV8872), 3 socket driver bước TMC2209, cổng bus servo STS3215, USB-C (CDC), CAN và các header SPI, I2C, UART.

Board điều khiển chuyển động dùng STM32F407VET6, 100 × 100 mm, 2 lớp. Một board gồm 4 kênh động cơ DC (DRV8872), 3 socket driver bước TMC2209, cổng bus servo STS3215, USB-C (CDC), CAN và các header SPI, I2C, UART.

Repo gồm hồ sơ thiết kế (KiCad, Gerber, BOM), firmware, thư viện Python, vỏ in 3D và tài liệu hướng dẫn đặt mạch, mua linh kiện, hàn, kiểm tra, ứng dụng. Tác giả thiết kế: tue-minh. Chỉnh sửa và bổ sung: giang-hoangnguyen.

MM Control, from the project README
From the project README

Main components on the MM Control

MM Control bill of materials (BOM)

107 components, 47 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LED
MCU1
4
DRV8872DDA
U1, U3, U4, U6
1
AMS1117-3.3
U2
1
STM32F407VETx
U5
3
TMC2209_SILENTSTEPSTICK
U7, U8, U9
1
TPS5430DDA
U12
1
TJA1051T-3
U13
1
8 MHz
Y1
1
Conn_01x03
J1
1
Conn_01x06
J2
1
Conn_01x04
J3
3
Conn_01x04
J4, J5, J6
5
Conn_01x02
J7, J8, J23, J24, J25
2
Conn_01x02
J9, J10
2
Conn_01x03
J11, J12
1
Conn_01x02
J17
1
Conn_02x03_Odd_Even
J18
1
USB_C_Receptacle_USB2.0_16P
J22
1
20k
RV1
1
RESET
SW1
Show 27 more
QtyPartRefs
1
SW_SPDT
SW3
8
LED
3V3, 5V1, DC_Fault1, DC_Fault2, DC_Fault3, DC_Fault4, STEP_EN1, VCC1
1
SS34
D2
1
22uh
L2
1
220uf
C1
2
10uf
C2, C6
10
100nf
C4, C5, C7, C10, C12, C34, C39, C40 +2
7
100uf
C8, C9, C11, C13, C30, C31, C32
2
2.2uf
C14, C19
12
100nf
C15, C16, C20, C21, C22, C23, C24, C25 +4
2
10pf
C17, C18
2
1uf
C28, C29
1
10nf
C37
2
100k
R1, R7
4
0.2R
R2, R3, R4, R20
1
1M
R5
3
10k
R6, R8, R11
2
5k1
R9, R10
1
1k5
R12
2
22
R13, R14
1
43k
R15
1
681
R17
1
12k
R18
1
120R
R21
1
102
R23
1
4k7
R27
3
471
RN1, RN2, RN3

MM Control design files

The KiCad project lives in the giang-hoangnguyen/MM_Control repository on GitHub; these links point at the commit this page was built from.

MM Control: common questions

What microcontroller does the MM Control use?

The MM Control is built around the STM32F407VETx, from the STM32 family.

How big is the MM Control PCB?

The MM Control measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MM Control?

107 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MM Control design files?

From the giang-hoangnguyen/MM_Control repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MM Control design in my own project?

The repository has no license, so all rights stay with giang-hoangnguyen. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MM Control without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards