7 open source boards using the LED
Real designs built with the LED, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SAFETy-Computer
adasneves127
127.7 × 134.9 mm73 parts2LNo license3STM32
MM Control
giang-hoangnguyen
100 × 100 mm107 parts2LNo license0Z80-Calculator
BrandonMitchell1920
199.4 × 125.7 mm86 parts2LNo license0Diagnostic-SIMM-30pin
kulichbulich
88.9 × 21 mm59 parts2LMIT0ESP32
Cortex controller
rubaiyat666
29.5 × 110.5 mm15 parts2LMIT0EDA-
Pengyang-uestc
22 × 28.5 mm6 parts2LNo license0Quango Controls
dchwebb
80.8 × 110 mm37 parts2LNo license5
How designs wire the LED
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LED connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Kpin 1 | Connected to: Signal 67% · GND 33% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Quango Controls by dchwebb, SAFETy-Computer by adasneves127, Z80-Calculator by BrandonMitchell1920 and MM Control by giang-hoangnguyen.
The LED in open source designs
The gallery holds 7 open source boards using the LED from 7 GitHub repositories; a typical one measures about 88.9 × 110 mm and carries around 59 components.
100% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Quango Controls by dchwebb.
What boards using the LED are built for
LED: common questions
Where can I find a LED reference design?
Each of the 7 boards on this page is a real design using the LED. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LED use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the LED?
The median is 88.9 × 110 mm, and 100% are two-layer designs.
What is the most popular open source board using the LED?
By GitHub stars, Quango Controls by dchwebb, with 5 stars.
Can I simulate one of these boards using the LED before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.