5 open source boards using the DRV8872DDA
Real designs built with the DRV8872DDA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Sigfox chicken coop
Jeija
50 × 53 mm99 parts4LNo license3STM32
MM Control
giang-hoangnguyen
100 × 100 mm107 parts2LNo license0Avionic-Sirius
axpaul
36 × 90 mm93 parts4LNo license0Mss cascade basic testjig
IowaScaledEngineering
101.6 × 120.7 mm97 parts2LNo license0STM32
Tensilguard
jayis1
100 × 60 mm12 parts4LNo license0
How designs wire the DRV8872DDA
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the DRV8872DDA connects to, and the resistors, capacitors and other passives placed on it.
- The VM pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 47 µF).
- The ISEN pin has a resistor to GND on 3 of 5 designs, most often 200 mΩ (then 0 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 9 | Connected to: GND 89% | — |
| VMpin 5 | Connected to: BATT 50% · a signal 50% |
|
| ISENpin 7 | Connected to: Signal 60% · GND 40% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sigfox chicken coop by Jeija, Avionic-Sirius by axpaul, MM Control by giang-hoangnguyen and Mss cascade basic testjig by IowaScaledEngineering.
The DRV8872DDA in open source designs
The gallery holds 5 open source boards using the DRV8872DDA from 5 GitHub repositories; a typical one measures about 100 × 90 mm and carries around 97 components.
60% use four copper layers or more, and 0% carry an open source license.
The most starred is Sigfox chicken coop by Jeija.
What boards using the DRV8872DDA are built for
DRV8872DDA: common questions
Where can I find a DRV8872DDA reference design?
Each of the 5 boards on this page is a real design using the DRV8872DDA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the DRV8872DDA VM pin?
The VM pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 5 open source designs using the DRV8872DDA.
What resistor goes on the DRV8872DDA ISEN pin?
The ISEN pin has a resistor to GND on 3 of 5 designs, most often 200 mΩ (then 0 Ω). Counted from the KiCad layouts of 5 open source designs using the DRV8872DDA.
Which microcontrollers do boards using the DRV8872DDA use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the DRV8872DDA?
The median is 100 × 90 mm, and 40% are two-layer designs.
What is the most popular open source board using the DRV8872DDA?
By GitHub stars, Sigfox chicken coop by Jeija, with 3 stars.
Can I simulate one of these boards using the DRV8872DDA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.