Cad flag

GJN-Aerospace·Halcyon·Hardware/Electronics/Components/MCU/References/samd_hcc_mod-master/demo_boards/canadian_flag/cad_flag.kicad_pcb

Cad flag PCB layout, top view — open source Microchip SAM board by GJN-Aerospace

About the Cad flag PCB

Cad flag is an open source Microchip SAM PCB design by GJN-Aerospace, published on GitHub. It is a 2-layer board measuring 70 × 35 mm, with 4 components from 3 distinct parts.

Its main chip is the SAMD21_MOD, from the Microchip SAM family. By type, the board carries 3 connectors and 1 IC.

It belongs with the robotics & motion designs in this gallery.

From the project

GitHub repository for actively stabilized model rocket project.

Main components on the Cad flag

Cad flag bill of materials (BOM)

4 components, 3 distinct parts.

QtyPartRefs
1
SAMD21_MOD
U1
2
Conn_01x12
J1, J3
1
USB_OTG
J2

Cad flag design files

The KiCad project lives in the GJN-Aerospace/Halcyon repository on GitHub; these links point at the commit this page was built from.

Cad flag: common questions

What microcontroller does the Cad flag use?

The Cad flag is built around the SAMD21_MOD, from the Microchip SAM family.

How big is the Cad flag PCB?

The Cad flag measures 70 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cad flag?

4 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Cad flag design files?

From the GJN-Aerospace/Halcyon repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Cad flag design in my own project?

The repository has no license, so all rights stay with GJN-Aerospace. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Cad flag without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in Halcyon

Similar boards