Hcc arduino

GJN-Aerospace·Halcyon·Hardware/Electronics/Components/MCU/References/samd_hcc_mod-master/demo_boards/Arduino Layout/hcc_arduino.kicad_pcb

Hcc arduino PCB layout, top view — open source Microchip SAM board by GJN-Aerospace

About the Hcc arduino PCB

Hcc arduino is an open source Microchip SAM PCB design by GJN-Aerospace, published on GitHub. It is a 2-layer board measuring 53.3 × 57.6 mm, with 12 components from 12 distinct parts.

Its main chip is the SAMD21_MOD, from the Microchip SAM family. Other key parts include the charge_mod. By type, the board carries 6 connectors, 2 ICs, 1 fuse, 1 diode and 1 resistor.

It belongs with the robotics & motion designs in this gallery.

From the project

GitHub repository for actively stabilized model rocket project.

Main components on the Hcc arduino

SAMD21_MODcharge_mod

Hcc arduino bill of materials (BOM)

12 components, 12 distinct parts.

QtyPartRefs
1
SAMD21_MOD
U1
1
charge_mod
U2
1
BATT
J1
1
USB_OTG
J2
1
D2
J3
1
D7
J4
1
D8
J5
1
IOREF
J6
1
Fuse
F1
1
Arduino_M0_Shield
XA1
1
LED
D1
1
2k
R1

Hcc arduino design files

The KiCad project lives in the GJN-Aerospace/Halcyon repository on GitHub; these links point at the commit this page was built from.

Hcc arduino: common questions

What microcontroller does the Hcc arduino use?

The Hcc arduino is built around the SAMD21_MOD, from the Microchip SAM family.

How big is the Hcc arduino PCB?

The Hcc arduino measures 53.3 × 57.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hcc arduino?

12 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hcc arduino design files?

From the GJN-Aerospace/Halcyon repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Hcc arduino design in my own project?

The repository has no license, so all rights stay with GJN-Aerospace. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hcc arduino without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in Halcyon

Similar boards