Hccg
GJN-Aerospace·Halcyon·Hardware/Electronics/Components/MCU/References/samd_hcc_mod-master/hcc_g/PCB/hccg.kicad_pcb
About the Hccg PCB
Hccg is an open source Microchip SAM PCB design by GJN-Aerospace, published on GitHub. It is a 2-layer board measuring 18 × 22 mm, with 25 components from 14 distinct parts.
Its main chip is the SAMD21G18, from the Microchip SAM family. Other key parts include the AP2112K-3.3V and SAMD21_MOD. By type, the board carries 8 capacitors, 5 connectors, 4 diodes, 3 ICs, 3 resistors and 1 crystal.
It belongs with the robotics & motion designs in this gallery.
From the project
GitHub repository for actively stabilized model rocket project.
Main components on the Hccg
Hccg bill of materials (BOM)
25 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3V | SOT-23-5 | U1 |
| 1 | SAMD21G18 | QFN-48-EP-ST_NoVia | U2 |
| 1 | SAMD21_MOD | SAMD21G18_MOD | U4 |
| 1 | Crystal_Small | crystal_smd_3.20x1.50mm2 | Y1 |
| 5 | TEST_1P | TESTP_1_5 | J1, J2, J3, J4, J5 |
| 1 | SW_PUSH | switch_kmr2 | SW4 |
| 1 | GLED | LED-0603 | D1 |
| 1 | YLED | LED-0603 | D2 |
| 2 | BAT20J | SOD-323 | D3, D4 |
| 2 | 15pF | C_0402 | C2, C4 |
| 4 | 0.1uF | C_0402 | C3, C5, C11, C12 |
| 2 | 1uF | C_0402 | C8, C9 |
| 1 | 10k | R_0402 | R3 |
| 2 | 1k | R_0402 | R8, R9 |
Hccg design files
The KiCad project lives in the GJN-Aerospace/Halcyon repository on GitHub; these links point at the commit this page was built from.
Hccg: common questions
What microcontroller does the Hccg use?
The Hccg is built around the SAMD21G18, from the Microchip SAM family.
How big is the Hccg PCB?
The Hccg measures 18 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hccg?
25 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hccg design files?
From the GJN-Aerospace/Halcyon repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Hccg design in my own project?
The repository has no license, so all rights stay with GJN-Aerospace. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hccg without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in Halcyon
Microchip SAM
Halcyon
GJN-Aerospace
50 × 70 mm70 parts2LNo license0Microchip SAM
Hcc cherry
GJN-Aerospace
77 × 77 mm21 parts2LNo license0Microchip SAM
Hcc boy
GJN-Aerospace
75 × 42.3 mm15 parts2LNo license0Microchip SAM
Hcc arduino
GJN-Aerospace
53.3 × 57.6 mm12 parts2LNo license0Programming jig
GJN-Aerospace
60 × 55 mm11 parts2LNo license0Lipo charge mod
GJN-Aerospace
18 × 7 mm9 parts2LNo license0Microchip SAM
Cad flag
GJN-Aerospace
70 × 35 mm4 parts2LNo license0
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416