Tripod-FOC

GoTouchGra55·Tripod-FOC·KiCAD/FOC.kicad_pcb

Tripod-FOC PCB layout, top view — open source STM32 board by GoTouchGra55

About the Tripod-FOC PCB

Tripod-FOC is an open source STM32 PCB design by GoTouchGra55, published on GitHub under the MIT license. It is a 4-layer board measuring 58.2 × 53.1 mm, with 126 components from 54 distinct parts.

Its main chip is the STM32F405RGTX, from the STM32 family. Other key parts include the INA240A1PW, LM321, AS5047D, DRV8353RSRGZR and TJA1051TK-3. By type, the board carries 56 capacitors, 36 resistors, 10 ICs, 10 connectors, 6 transistors and 4 diodes.

It belongs with the robotics & motion and power & battery designs in this gallery.

From the project

FOC driver.

A device that works as the brushless FOC motor driver of a tri-legged hopping robot!

Tripod-FOC is a 4 layer printed circuit board which is to be used as the field-oriented control based motor driver of a major robot project I've been working on.

The board handles the robot's main motor control providing the necessary measurement for its brushless motors.

1. Order the PCB using the provided files. 2. Solder all SMD components according to the schematic and PCB layout. 3. Inspect all solder joints and check for shorts. 4. Connect the peripherals according to the schematic. 5. Flash the…

Tripod-FOC, from the project README
From the project README

Main components on the Tripod-FOC

Tripod-FOC bill of materials (BOM)

126 components, 54 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
INA240A1PW
U1, U2, U3
1
LM321
U4
1
AS5047D
U5
1
DRV8353RSRGZR
U6
1
TJA1051TK-3
U8
1
USBLC6-2SC6
U9
1
STM32F405RGTX
STM32F405RGTx
U10
1
TPS54302
U11
6
WSD40120DN56G
Q1, Q2, Q3, Q4, Q5, Q6
1
25MHZ
25MHz
Y1
1
OUT A
J1
1
OUT B
J2
1
OUT C
J3
2
CONN_01X02
Conn_01x02
J4, J5
1
CONN_01X04_MOUNTINGPIN
Conn_01x04_MountingPin
J6
2
CONN_01X03_MOUNTINGPIN
Conn_01x03_MountingPin
J7, J9
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J8
1
CONN_01X06_MOUNTINGPIN
Conn_01x06_MountingPin
J10
1
MBR0530
D1
1
RED
D2
Show 34 more
QtyPartRefs
1
GREEN
D3
1
MBR0530
D5
1
C19330
fcm 1608-0603
FB1
1
220UH
220uH
L1
1
10UH
10uH
L2
15
10UF
10uF
C1, C2, C5, C6, C9, C10, C15, C16 +7
21
100NF
100nF
C3, C7, C11, C13, C14, C23, C24, C26 +13
3
1NF
1nF
C4, C8, C12
2
47NF
47nF
C27, C32
5
1UF
1uF
C28, C33, C35, C46, C56
1
470NF
470nF
C30
1
4.7NF
4.7nF
C38
5
22UF
22uF
C47, C48, C52, C53, C55
2
18PF
18pF
C49, C50
1
22PF
22pF
C54
3
0.01R
R1, R7, R11
6
10R
R2, R3, R5, R6, R9, R10
7
1K
R4, R8, R12, R16, R21, R22, R35
1
2K2
R13
1
39K
R14
3
10K
10k
R15, R19, R20
1
332K
R17
1
324K
R18
1
511K
R23
1
105K
R24
1
49.9R
R25
1
1K8
1k8
R26
2
100R
R27, R28
2
30R
R29, R32
1
120R
R30
1
100K
R31
1
13.3K
R33
1
3.01K
R34
1
3R
R36

Tripod-FOC design files

The KiCad project lives in the GoTouchGra55/Tripod-FOC repository on GitHub; these links point at the commit this page was built from.

Tripod-FOC: common questions

What microcontroller does the Tripod-FOC use?

The Tripod-FOC is built around the STM32F405RGTX, from the STM32 family.

How big is the Tripod-FOC PCB?

The Tripod-FOC measures 58.2 × 53.1 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Tripod-FOC?

126 components, from 54 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Tripod-FOC design files?

From the GoTouchGra55/Tripod-FOC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Tripod-FOC design in my own project?

Yes, under the terms of its MIT license, which GoTouchGra55 chose for the repository.

Can I test firmware for the Tripod-FOC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards