15 open source boards using the INA240A1PW

Real designs built with the INA240A1PW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the INA240A1PW

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the INA240A1PW connects to, and the resistors, capacitors and other passives placed on it.

  • The + pin has a series resistor on 8 of 10 designs, most often 10 mΩ (then 1 kΩ).
  • The V+ pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 4.7 µF).
  • Pin 8 has a series resistor on 8 of 9 designs, most often 1 kΩ (then 33 Ω).
  • The - pin has a series resistor on 7 of 10 designs, most often 10 mΩ (then 5 mΩ).
GNDpin 1, 4Connected to: GND 90%
+pin 2Connected to: A connector 20%
  • Series resistor on 80% · 10 mΩ (2), 1 kΩ (2), 5 mΩ (2)
  • Series capacitor on 40% · 100 nF (2)
-pin 3Connected to: A connector 30%
  • Series resistor on 70% · 10 mΩ (2), 5 mΩ (2), 0 Ω (1)
V+pin 5Connected to: 3.3V 90%
  • Decoupling capacitor on 80% · 100 nF (10), 4.7 µF (1), 2.2 µF (1)
REF2pin 6Connected to: 3.3V 67% · GND 22%
REF1pin 7Connected to: GND 67% · a signal 22%
Pin 8Connected to: The microcontroller 33%
  • Series resistor on 89% · 1 kΩ (2), 33 Ω (2), 2.2 kΩ (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sf motion by sirojudinMunir, SuperCap2024Control V1.1R F3 ISOPWR by hkustenterprize, Rev6.0 flat powerstage by oresat and PowerControl PCM V0.1 Control by hkustenterprize.

The INA240A1PW in open source designs

The gallery holds 15 open source boards using the INA240A1PW from 10 GitHub repositories; a typical one measures about 44 × 59.5 mm and carries around 123 components.

67% use four copper layers or more, and 60% carry an open source license.

The most starred is Sf motion by sirojudinMunir.

Microcontrollers on boards using the INA240A1PW

INA240A1PW: common questions

Where can I find a INA240A1PW reference design?

Each of the 15 boards on this page is a real design using the INA240A1PW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the INA240A1PW + pin?

The + pin has a series resistor on 8 of 10 designs, most often 10 mΩ (then 1 kΩ). Counted from the KiCad layouts of 10 open source designs using the INA240A1PW.

What decoupling capacitors do designs use on the INA240A1PW V+ pin?

The V+ pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 10 open source designs using the INA240A1PW.

What resistor goes on the INA240A1PW pin 8?

Pin 8 has a series resistor on 8 of 9 designs, most often 1 kΩ (then 33 Ω). Counted from the KiCad layouts of 10 open source designs using the INA240A1PW.

What parts are used alongside the INA240A1PW?

The RS3236, RY8411, STM32F334R8TX, GS8332-SR and ISO_DC appear in the most repositories here.

Which microcontrollers do boards using the INA240A1PW use?

Most are built on STM32 (11).

How big is a typical board using the INA240A1PW?

The median is 44 × 59.5 mm, and 33% are two-layer designs.

What is the most popular open source board using the INA240A1PW?

By GitHub stars, Sf motion by sirojudinMunir, with 95 stars.

Can I simulate one of these boards using the INA240A1PW before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part