HardLabs

Dome Logics V1

greghulette·KiCad-Files-Public·Dome_Logics_V1/Dome_Logics_V1.kicad_pcb

Dome Logics V1 PCB layout, top view — open source ESP32 board by greghulette
Simulate this board

About the Dome Logics V1 PCB

Dome Logics V1 is an open source ESP32 PCB design by greghulette, published on GitHub. It is a 4-layer board measuring 54.9 × 51.9 mm, with 26 components from 21 distinct parts.

Its main chip is the ESP32-WROOM-32D_16MB_, from the ESP32 family. Other key parts include the CJ2301_S1, ME6211C33M5G, CH340C, UMH3N and D24V550F5_Step_Down_Regulator. By type, the board carries 7 capacitors, 6 ICs, 6 connectors, 4 resistors, 1 switch and 1 inductor.

Main components on the Dome Logics V1

ESP32-WROOM-32D_16MB_CJ2301_S1ME6211C33M5GCH340CUMH3ND24V550F5_Step_Down_Regulator

Dome Logics V1 bill of materials (BOM)

26 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32D_16MB_
U1
1
CJ2301_S1
U2
1
ME6211C33M5G
U3
1
CH340C
U4
1
UMH3N
U5
1
D24V550F5_Step_Down_Regulator
U6
1
C132563
USB_B_Micro
J1
1
CONN_01X04
Conn_01x04
J2
1
C471416
Front Logics
J3
1
12OUT
J5
1
C474892
5V OUT
J7
1
C471416
SERIAL_FU
J12
1
B5819W-TP
CR1
1
SW_Push
SW1
1
WS2812B-2020
L1
3
100NF
100nF
C1, C3, C6
2
10UF
10uF
C2, C4
2
1UF
1uF
C5, C7
1
10K
R1
2
100K
R2, R3
Show 1 more
QtyPartRefs
1
220
R4

Dome Logics V1 design files

The KiCad project lives in the greghulette/KiCad-Files-Public repository on GitHub; these links point at the commit this page was built from.

Dome Logics V1: common questions

What microcontroller does the Dome Logics V1 use?

The Dome Logics V1 is built around the ESP32-WROOM-32D_16MB_, from the ESP32 family.

How big is the Dome Logics V1 PCB?

The Dome Logics V1 measures 54.9 × 51.9 mm, has 4 copper layers and is 4.69 mm thick.

How many components are on the Dome Logics V1?

26 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Dome Logics V1 design files?

From the greghulette/KiCad-Files-Public repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Dome Logics V1 design in my own project?

The repository has no license, so all rights stay with greghulette. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dome Logics V1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in KiCad-Files-Public

Similar boards