ClaudeDeck-S3
Gustavo-Santos-Felipe·ClaudeDeck-S3·hardware/project 1.kicad_pcb
About the ClaudeDeck-S3 PCB
ClaudeDeck-S3 is an open source ESP32 PCB design by Gustavo-Santos-Felipe, published on GitHub. It is a 2-layer board measuring 134 × 109 mm, with 25 components from 12 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3 and ER_OLEDM0.91_1X-I2C. By type, the board carries 10 switches, 4 diodes, 4 resistors, 3 ICs, 3 capacitors and 1 connector.
It belongs with the displays & leds, keyboards and iot & wireless designs in this gallery.
From the project
An open-source, ESP32-S3-powered mechanical macropad designed for developer productivity and Claude AI integration. Features 9 hot-swappable mechanical switches with per-key RGB backlighting, a rotary encoder, and an I2C OLED display for real-time status and shortcut navigation.
A custom 3x3 mechanical macropad powered by the ESP32-S3, featuring a 0.91" OLED display and per-key RGB lighting.
How it was made: 1. PCB Design (Week 1): I designed the schematic and routed the custom PCB using KiCad. I ensured proper trace widths for the power delivery to the WS2812B LEDs and created a compact layout that fits exactly under the 3x3 switch grid. 2. Enclosure Design (Week 2): I modeled a custom 6-degree angled ergonomic case in Autodesk Fusion 360, incorporating exact tolerances (0.25mm) for 3D printing and precise cutouts for the OLED screen and USB-C port.

Main components on the ClaudeDeck-S3
ClaudeDeck-S3 bill of materials (BOM)
25 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | ER_OLEDM0.91_1X-I2C ER_OLEDM0.91_1x-I2C | ER_OLEDM0.91_1x-I2C | U3 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 9 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW10 |
| 4 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4 |
| 2 | 10µF | C_0805_2012Metric | C1, C2 |
| 1 | C | C_0805_2012Metric | C3 |
| 2 | 5.1kΩ | R_0805_2012Metric | R1, R2 |
| 1 | R_US | R_0805_2012Metric | R3 |
| 1 | 330Ω | R_0805_2012Metric | R4 |
ClaudeDeck-S3 design files
The KiCad project lives in the Gustavo-Santos-Felipe/ClaudeDeck-S3 repository on GitHub; these links point at the commit this page was built from.
ClaudeDeck-S3: common questions
What microcontroller does the ClaudeDeck-S3 use?
The ClaudeDeck-S3 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the ClaudeDeck-S3 PCB?
The ClaudeDeck-S3 measures 134 × 109 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ClaudeDeck-S3?
25 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ClaudeDeck-S3 design files?
From the Gustavo-Santos-Felipe/ClaudeDeck-S3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ClaudeDeck-S3 design in my own project?
The repository has no license, so all rights stay with Gustavo-Santos-Felipe. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ClaudeDeck-S3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k