Room panel
gustavwrisberg·room-panel·hardware/kicad/Smart_home_universal_board.kicad_pcb
About the Room panel PCB
Room panel is an open source ESP32 PCB design by gustavwrisberg, published on GitHub. It is a 2-layer board measuring 37.2 × 54.4 mm, with 27 components from 15 distinct parts.
Its main chip is the XIAO-ESP32-C6-SMD, from the ESP32 family. Other key parts include the SHT40-N-NF, BH1750FVI-TR and PCA9554PW,118. By type, the board carries 9 capacitors, 5 switches, 5 resistors, 4 ICs and 4 connectors.
It belongs with the iot & wireless designs in this gallery.
From the project
libs/EasyEDA. is copied from the original library (E:\KicadLibrary), trimmed to the parts on this board. The XIAO library was extracted from the copy embedded in the schematic and PCB.
libs/EasyEDA. is copied from the original library (E:\KicadLibrary), trimmed to the parts on this board. The XIAO library was extracted from the copy embedded in the schematic and PCB.
The footprints load their 3D models from ${KICAD3RDPARTY}/EasyEDA.3dshapes/. On another PC, copy libs/EasyEDA.3dshapes into the folder that KICAD3RDPARTY points to (Preferences → Configure Paths) to see them in the 3D viewer. Fabrication is not affected.
Main components on the Room panel
Room panel bill of materials (BOM)
27 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SHT40-N-NF Nyfea(徕飞) | DFN-4_L1.5-W1.5-P0.80-TL-EP | U1 |
| 1 | XIAO-ESP32-C6-SMD | XIAO-ESP32-C6-SMD | U2 |
| 1 | BH1750FVI-TR ROHM(罗姆) | WSOF-6_L2.6-W1.6-P0.50-TL-EP | U4 |
| 1 | PCA9554PW,118 NXP(恩智浦) | TSSOP-16_L5.0-W4.4-P0.65-LS6.4-BL | U5 |
| 1 | CONN_01X05 Conn_01x05 | C4002 | J1 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinSocket_2x05_P2.54mm_Vertical | J2 |
| 1 | CONN_01X08 Conn_01x08 | JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J3 |
| 1 | CONN_01X04 Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | BMQ22-N1A1-2012-A SHETIME(高钺达) | SW-SMD_BMQ22-N1A1-2012-A | SW1 |
| 4 | TS-1187A-S16 JXTCONN(聚兴泰) | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW2, SW3, SW4, SW5 |
| 1 | C15850 10 µF | C_0805_2012Metric | C7 |
| 6 | 100 nF | C_0402_1005Metric | C9, C10, C11, C12, C13, C14 |
| 2 | 10 nF | C_0402_1005Metric | C15, C16 |
| 3 | 4K7 4k7 | R_0402_1005Metric | R8, R9, R10 |
| 2 | 10K 10k | R_0402_1005Metric | R11, R12 |
Room panel design files
The KiCad project lives in the gustavwrisberg/room-panel repository on GitHub; these links point at the commit this page was built from.
Room panel: common questions
What microcontroller does the Room panel use?
The Room panel is built around the XIAO-ESP32-C6-SMD, from the ESP32 family.
How big is the Room panel PCB?
The Room panel measures 37.2 × 54.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Room panel?
27 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Room panel design files?
From the gustavwrisberg/room-panel repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Room panel design in my own project?
The repository has no license, so all rights stay with gustavwrisberg. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Room panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k