3 open source boards using the SHT40-N-NF
Real designs built with the SHT40-N-NF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Spool sentry
rwrife
66 × 75 mm32 parts2LMIT0ESP32
Room panel
gustavwrisberg
37.2 × 54.4 mm27 parts2LNo license0ESP32
Room sensor
gustavwrisberg
43.3 × 22 mm10 parts2LCERN-OHL-S-2.00
The SHT40-N-NF in open source designs
The gallery holds 3 open source boards using the SHT40-N-NF from 3 GitHub repositories; a typical one measures about 43.3 × 54.4 mm and carries around 27 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Spool sentry by rwrife.
Parts used alongside the SHT40-N-NF
Microcontrollers on boards using the SHT40-N-NF
What boards using the SHT40-N-NF are built for
SHT40-N-NF: common questions
Where can I find a SHT40-N-NF reference design?
Each of the 3 boards on this page is a real design using the SHT40-N-NF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SHT40-N-NF use?
Most are built on ESP32 (3).
How big is a typical board using the SHT40-N-NF?
The median is 43.3 × 54.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the SHT40-N-NF?
By GitHub stars, Spool sentry by rwrife, with 0 stars.
Can I simulate one of these boards using the SHT40-N-NF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.