16 open source boards using the BH1750FVI-TR
Real designs built with the BH1750FVI-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Weather station
Invactive
90 × 32 mm59 parts2LNo license7ESP8266
MatrixClock
middelink
160 × 32 mm66 parts2LMIT2Panel
themkoi
69.4 × 89.9 mm59 parts2LNo license2PCBRev2
MilesMayhew
213.4 × 128.3 mm63 parts2LNo license1Panelized
unicab369
93.2 × 99.1 mm631 parts2LNo license0ESP32
Airquality
MorgenWebDigital
45 × 95 mm76 parts2LCustom license0ESP32
Wisp
huulanka
60 × 80 mm74 parts4LMIT0NumitronClock
spott
110 × 40 mm50 parts2LNo license0SmartFarm
AntonSangho
80 × 79.1 mm36 parts2LNo license0Kurokku
wolf-yuan-6115
105.3 × 70.8 mm27 parts2LNo license0ESP32
Room panel
gustavwrisberg
37.2 × 54.4 mm27 parts2LNo license0ESP32
Room sensor
gustavwrisberg
43.3 × 22 mm10 parts2LCERN-OHL-S-2.00- schematic only · 61 partsESP32
JWatch
JujuXu
61 partsNo license0 Capstone
MilesMayhew
232.4 × 172.7 mm55 parts2LNo license1Mess-Sense+USBC
unicab369
99.1 × 99.1 mm440 parts2LNo license0Top board
themkoi
51 × 18.4 mm17 parts2LNo license2
How designs wire the BH1750FVI-TR
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the BH1750FVI-TR connects to, and the resistors, capacitors and other passives placed on it.
- The SDA pin has a pull-up to 3.3V on 11 of 12 designs, most often 4.7 kΩ (then 10 kΩ).
- The SCL pin has a pull-up to 3.3V on 11 of 12 designs, most often 4.7 kΩ (then 10 kΩ).
- The DVI pin has a capacitor to GND on 10 of 12 designs, most often 100 nF (then 1 µF).
- The VCC pin has a decoupling capacitor on 8 of 12 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1 | Connected to: 3.3V 100% |
|
| ADDRpin 2 | Connected to: GND 50% · a signal 50% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| SDApin 4 | Connected to: The microcontroller 42%, a connector 33% |
|
| DVIpin 5 | Connected to: Signal 75% · 3.3V 25% |
|
| SCLpin 6 | Connected to: The microcontroller 42%, a connector 33% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Weather station by Invactive, MatrixClock by middelink, Panel by themkoi and CapstonePCB by MilesMayhew.
The BH1750FVI-TR in open source designs
The gallery holds 16 open source boards using the BH1750FVI-TR from 14 GitHub repositories; a typical one measures about 90 × 79.1 mm and carries around 59 components.
93% are two-layer designs, the rest use four layers or more, and 19% carry an open source license.
The most starred is Weather station by Invactive.
Parts used alongside the BH1750FVI-TR
What boards using the BH1750FVI-TR are built for
BH1750FVI-TR: common questions
Where can I find a BH1750FVI-TR reference design?
Each of the 16 boards on this page is a real design using the BH1750FVI-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the BH1750FVI-TR SDA pin?
The SDA pin has a pull-up to 3.3V on 11 of 12 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 12 open source designs using the BH1750FVI-TR.
What pull-up resistor is used on the BH1750FVI-TR SCL pin?
The SCL pin has a pull-up to 3.3V on 11 of 12 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 12 open source designs using the BH1750FVI-TR.
How is the BH1750FVI-TR DVI pin connected?
The DVI pin has a capacitor to GND on 10 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the BH1750FVI-TR.
What parts are used alongside the BH1750FVI-TR?
The APDS-9960, BME280, SGP41-D-R4, SHT31-DIS and SHT40-N-NF appear in the most repositories here.
Which microcontrollers do boards using the BH1750FVI-TR use?
Most are built on ESP32 (5), ESP8266 (1) and STM32 (1).
How big is a typical board using the BH1750FVI-TR?
The median is 90 × 79.1 mm, and 93% are two-layer designs.
What is the most popular open source board using the BH1750FVI-TR?
By GitHub stars, Weather station by Invactive, with 7 stars.
Can I simulate one of these boards using the BH1750FVI-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.