Fertilizer-Pump

Handkep·Fertilizer-Pump·KiCad/fertilizer-pump.kicad_pcb

Fertilizer-Pump PCB layout, top view — open source ESP32 board by Handkep

About the Fertilizer-Pump PCB

Fertilizer-Pump is an open source ESP32 PCB design by Handkep, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 93 components from 41 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the HUSB238_xxxDD, TPS54302 and BTT TMC2209. By type, the board carries 30 capacitors, 27 resistors, 14 connectors, 7 diodes, 5 transistors and 4 ICs.

It belongs with the robotics & motion, displays & leds and power & battery designs in this gallery.

From the project

The fertilizer dispenser automatically doses fertilizer concentrates or stock solutions using one or more peristaltic pumps. The amount dispensed depends on the selected recipe and the intended irrigation water volume. After dosing, the pump and outlet tubing are flushed with wat

The fertilizer dispenser automatically doses fertilizer concentrates or stock solutions using one or more peristaltic pumps. The amount dispensed depends on the selected recipe and the intended irrigation water volume. After dosing, the pump and outlet tubing are flushed with water to help prevent salt deposits.

Project status: In development. The Peristaltic pump is currently in the prototyping phase. PCB design is in progress. The user interface and display are still to be determined.

Main components on the Fertilizer-Pump

Fertilizer-Pump bill of materials (BOM)

93 components, 41 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
HUSB238_xxxDD
U2
2
TPS54302
U3, U4
4
BTT TMC2209
A1, A2, A3, A4
1
SI2307A
Q1
4
AO3400A
Q2, Q3, Q4, Q9
1
Stepper1
J1
1
Stepper2
J2
1
Stepper3
J3
1
Stepper4
J4
1
Servo1
J5
1
USB_C_Receptacle_USB2.0_16P
J6
1
Servo2
J7
1
Servo3
J8
1
Servo4
J9
4
Conn_01x02
J11, J12, J13, J14
1
Barrel_Jack_Switch
J15
2
ESD762
D1, D2
1
D_Zener
D3
4
SS14
D4, D5, D6, D7
Show 21 more
QtyPartRefs
2
10u
L1, L2
4
220µF
C1, C23, C25, C27
11
100n
C2, C5, C6, C12, C13, C22, C24, C26 +3
2
1u
C3, C19
1
1n
C4
3
10u
C7, C14, C21
1
47p
C8
5
22u
C9, C10, C16, C17, C20
2
220uF
C11, C18
1
75p
C15
9
10K
R1, R2, R16, R17, R18, R19, R20, R21 +1
1
1K
R5
1
49.9K
R6
1
5.1K
R7
1
10.5K
R8
2
100k
R10, R12
1
22k
R11
1
13.3k
R13
2
22
R14, R15
4
100k
R23, R26, R28, R30
4
100
R24, R25, R27, R29

Fertilizer-Pump design files

The KiCad project lives in the Handkep/Fertilizer-Pump repository on GitHub; these links point at the commit this page was built from.

Fertilizer-Pump: common questions

What microcontroller does the Fertilizer-Pump use?

The Fertilizer-Pump is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Fertilizer-Pump PCB?

The Fertilizer-Pump measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fertilizer-Pump?

93 components, from 41 distinct parts. The full bill of materials is listed on this page.

Where can I download the Fertilizer-Pump design files?

From the Handkep/Fertilizer-Pump repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Fertilizer-Pump design in my own project?

The repository has no license, so all rights stay with Handkep. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fertilizer-Pump without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards