Hifi lite
Hive-RSI-Lab·hifi-lite·hardware/kicad/lite-main.kicad_pcb
About the Hifi lite PCB
Hifi lite is an open source ESP32 PCB design by Hive-RSI-Lab, published on GitHub. It is a 2-layer board measuring 118 × 90 mm, with 164 components from 58 distinct parts.
Its main chip is the ESP32-WROVER-E-N8R8, from the ESP32 family. Other key parts include the CH224A, TPS54302DDCR, SY8089A1AAC, LP5907MFX-3.3/NOPB and CH340B. By type, the board carries 71 capacitors, 50 resistors, 9 ICs, 9 transistors, 8 connectors and 8 diodes.
It belongs with the audio and iot & wireless designs in this gallery.
From the project
HiFi Lite: a USB-C streaming stereo amp on one board, designed by AI agents on Hive (hivelab.ca). KiCad, ESP32 firmware, web app, 3D-printed case, bench and the full design record.
The Lite tier's one board, as docs/product.md defines it. You plug a USB-C PD laptop charger of 65 W or more and a pair of speakers into it (Lite asks for 20 V and uses at most what that contract allows, 60–65 W with an ordinary cable: a bigger charger adds nothing; see issue #136). It streams over Wi-Fi (Spotify Connect, AirPlay, Lyrion) and Bluetooth, takes a DJ deck on RCA, and drives two subwoofers from RCA sub outs. A web app on your phone, three buttons or any IR remote control it.

Main components on the Hifi lite
Hifi lite bill of materials (BOM)
164 components, 58 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH224A | ESSOP-10_L4.9-W3.9-P1.0-LS6.0-TL-EP | U1 |
| 1 | TPS54302DDCR TPS54302 | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U2 |
| 1 | SY8089A1AAC | TSOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR | U3 |
| 1 | LP5907MFX-3.3/NOPB LP5907-3.3 | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U4 |
| 1 | ESP32-WROVER-E-N8R8 | WIFI-SMD_ESP32-WROVER-IE8MB | U5 |
| 1 | CH340B | SOP-16_L10.0-W3.9-P1.27-LS6.0-BL | U6 |
| 1 | null ES8388 null | QFN-28_L4.0-W4.0-P0.45-BL-EP | U7 |
| 1 | TPA3118D2DAPR TPA3118D2 | HTSSOP-32_L11.0-W6.1-P0.65-LS8.1-BL-EP | U8 |
| 1 | IRM-3638T | OPTO-TH_IRM-3638T | U9 |
| 1 | AO4485 | SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | Q1 |
| 5 | MMBT3904 | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q2, Q3, Q4, Q11, Q12 |
| 3 | 2N7002 | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q13, Q14, Q15 |
| 1 | TYPE-C-31-M-12 | USB-C_SMD-TYPE-C-31-M-12_1 | J1 |
| 1 | XDJK-0271-1650 RCA line in | CONN-TH_XDJK-0271-1650 | J2 |
| 1 | XDJK-0271-1650 RCA sub out | CONN-TH_XDJK-0271-1650 | J3 |
| 2 | 24.243.1 24.243 red | CONN-TH_24.243.1_RED | J4, J6 |
| 2 | 24.243.2 24.243 black | CONN-TH_24.243.2 | J5, J7 |
| 1 | X6511WVS-08H-C60D48R2 ESP32 spare header | HDR-SMD_8P-P2.54-V-M-LS4.8_R2 | J8 |
| 3 | TS-1187A-B-A-B TS-1187A | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1, SW2, SW3 |
| 1 | SMBJ22A | SMB_L4.6-W3.6-LS5.3-RD | D1 |
Show 38 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | KT-0603R red | LED-SMD_L1.6-W0.8-R-RD | D2 |
| 6 | PESDNC2FD5VB | DFN1006-2L-BI | D3, D4, D5, D6, D7, D8 |
| 4 | XR0850-100M 10uH 8A | IND-SMD_L8.0-W8.0_XR0850 | L1, L2, L3, L4 |
| 1 | SWPA6045S100MT 10uH | IND-SMD_L6.0-W6.0_SWPA6045S | L5 |
| 1 | SWPA4020S2R2NT 2.2uH | IND-SMD_L4.0-W4.0_VLCF4020 | L6 |
| 13 | CL10A105KB8NNNC 1uF | C_0603_1608Metric | C1, C15, C16, C22, C41, C44, C50, C60 +5 |
| 18 | CC0603KRX7R9BB104 100nF | C_0603_1608Metric | C2, C5, C6, C11, C17, C18, C21, C23 +10 |
| 1 | CL31A106KBHNNNE 10uF | C_1206_3216Metric | C3 |
| 1 | 1206B475K500NT 4.7uF | C_1206_3216Metric | C4 |
| 5 | CL21A226MAQNNNE 22uF | C_0805_2012Metric | C7, C8, C12, C25, C90 |
| 1 | CL10C470JB8NNNC 47pF | C_0603_1608Metric | C9 |
| 8 | CL10A106KP8NNNC 10uF | C_0603_1608Metric | C10, C13, C20, C35, C37, C39, C47, C48 |
| 1 | CL10C220JB8NNNC 22pF | C_0603_1608Metric | C14 |
| 3 | CL10A475KO8NNNC 4.7uF | C_0603_1608Metric | C19, C32, C80 |
| 1 | CL10B473KB8NNNC 47nF | C_0603_1608Metric | C26 |
| 2 | CL10C101JB8NNNC 100pF | C_0603_1608Metric | C42, C45 |
| 3 | CL21B105KBFNNNE 1uF | C_0805_2012Metric | C51, C52, C55 |
| 2 | CL10B102KB8NNNC 1nF | C_0603_1608Metric | C54, C57 |
| 1 | MA35V470M10X13 470uF 35V polymer | CAP-SMD_BD10.0-L10.3-W10.3-FD-LS11.0 | C58 |
| 1 | RVT220UF35V67RV0024 220uF 35V | CAP-SMD_BD8.0-L8.3-W8.3-LS9.3-FD | C59 |
| 4 | CL10B224KA8NNNC 220nF | C_0603_1608Metric | C64, C65, C66, C67 |
| 4 | CL31B105KBHNNNE 1uF | C_1206_3216Metric | C68, C69, C70, C71 |
| 2 | 0603B471K500NT 470pF | C_0603_1608Metric | C81, C83 |
| 2 | 0603WAF1203T5E 120k | R_0603_1608Metric | R1, R80 |
| 2 | 0603WAF0000T5E 0R | R_0603_1608Metric | R2, R3 |
| 18 | 0603WAF1002T5E 10k | R_0603_1608Metric | R4, R7, R14, R18, R20, R21, R24, R25 +10 |
| 9 | 0603WAF1003T5E 100k | R_0603_1608Metric | R5, R8, R9, R13, R17, R51, R52, R66 +1 |
| 1 | 0603WAF2203T5E 220k | R_0603_1608Metric | R6 |
| 1 | 0603WAF1302T5E 13k | R_0603_1608Metric | R10 |
| 1 | 0603WAF1503T5E 150k | R_0603_1608Metric | R11 |
| 1 | 0603WAF3302T5E 33k | R_0603_1608Metric | R12 |
| 4 | 0603WAF1001T5E 1k | R_0603_1608Metric | R15, R36, R38, R64 |
| 2 | 0603WAF2202T5E 22k | R_0603_1608Metric | R16, R81 |
| 2 | 0603WAF2201T5E 2.2k | R_0603_1608Metric | R22, R23 |
| 2 | 0603WAF1502T5E 15k | R_0603_1608Metric | R30, R33 |
| 3 | 0603WAF4702T5E 47k | R_0603_1608Metric | R37, R39, R82 |
| 1 | 0603WAF2002T5E 20k | R_0603_1608Metric | R50 |
| 1 | 0603WAF1000T5E 100R | R_0603_1608Metric | R65 |
Hifi lite design files
The KiCad project lives in the Hive-RSI-Lab/hifi-lite repository on GitHub; these links point at the commit this page was built from.
Hifi lite: common questions
What microcontroller does the Hifi lite use?
The Hifi lite is built around the ESP32-WROVER-E-N8R8, from the ESP32 family.
How big is the Hifi lite PCB?
The Hifi lite measures 118 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hifi lite?
164 components, from 58 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hifi lite design files?
From the Hive-RSI-Lab/hifi-lite repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hifi lite design in my own project?
The repository has no license, so all rights stay with Hive-RSI-Lab. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hifi lite without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k