14 open source boards using the SY8089A1AAC
Real designs built with the SY8089A1AAC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
WebScreen
HW-Lab-Hardware-Design-Agency
60.6 × 27.6 mm76 parts4LCERN-OHL-P-2.013ESP32
Eumesmo 24V 16xIn/16xOut/1-Wire Module
thermseekr
128 × 67.8 mm320 parts4LCC-BY-NC-4.06ESP32
GridWatcher
kylerichter36-coder
113.4 × 69.2 mm79 parts2LNo license3ESP32
Bwlc1a
teapotlaboratories
80.5 × 50 mm155 parts4LMIT2ESP32
Teacup carrier
thingino
257 × 117.5 mm133 parts4LGPL-3.02Artificer-A1-Single-Board-Computer
MattSpot10
115 × 90 mm486 parts6LMIT0ESP32
Core
Hive-RSI-Lab
120 × 100 mm297 parts4LMIT0RP2040/RP2350
CC3501-project hardware
enolf
85 × 56 mm105 parts4LNo license0ESP32
Eumesmo poe-2rl
thermseekr
82.5 × 45 mm105 parts4LCC-BY-NC-4.00HighSpeedUSBHub
Acidicts
80.6 × 57 mm86 parts4LNo license0ESP32
ESP 24V 16xIn/16xOut/1-Wire Module
thermseekr
108 × 67.8 mm318 parts4LCC-BY-NC-4.06ESP32
Teacup carrier merge test
thingino
257 × 117.5 mm131 parts4LGPL-3.02ESP32
Lite main
Hive-RSI-Lab
100 × 90 mm145 parts2LMIT0ESP32
ESP 8 Relay Module
thermseekr
148 × 67.8 mm271 parts2LCC-BY-NC-4.06
How designs wire the SY8089A1AAC
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the SY8089A1AAC connects to, and the resistors, capacitors and other passives placed on it.
- The LX_3 pin has a inductor on 8 of 10 designs, most often 2.2 µH (then 1 µH).
- The FB_5 pin has a resistor to GND on 8 of 9 designs, most often 10 kΩ (then 22.1 kΩ).
- The IN_4 pin is tied to 5V on 7 of 9 designs (a signal on 2).
- The EN_1 pin is tied to 5V on 6 of 10 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| EN_1pin 1 | Connected to: 5V 60% · a signal 40% | — |
| GND_2pin 2 | Connected to: GND 100% | — |
| LX_3pin 3 | Connected to: Signal 80% |
|
| IN_4pin 4 | Connected to: 5V 78% · a signal 22% | — |
| FB_5pin 5 | Connected to: Signal 89% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include WebScreen-PCB by HW-Lab-Hardware-Design-Agency, ESP 24V 16xIn/16xOut/1-Wire Module by thermseekr, GridWatcher by kylerichter36-coder and Bwlc1a by teapotlaboratories.
The SY8089A1AAC in open source designs
The gallery holds 14 open source boards using the SY8089A1AAC from 10 GitHub repositories; a typical one measures about 110.7 × 67.8 mm and carries around 139 components.
79% use four copper layers or more, and 50% carry an open source license.
The most starred is WebScreen-PCB by HW-Lab-Hardware-Design-Agency.
Parts used alongside the SY8089A1AAC
Microcontrollers on boards using the SY8089A1AAC
What boards using the SY8089A1AAC are built for
SY8089A1AAC: common questions
Where can I find a SY8089A1AAC reference design?
Each of the 14 boards on this page is a real design using the SY8089A1AAC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SY8089A1AAC LX_3 pin connected?
The LX_3 pin has a inductor on 8 of 10 designs, most often 2.2 µH (then 1 µH). Counted from the KiCad layouts of 10 open source designs using the SY8089A1AAC.
What resistor goes on the SY8089A1AAC FB_5 pin?
The FB_5 pin has a resistor to GND on 8 of 9 designs, most often 10 kΩ (then 22.1 kΩ). Counted from the KiCad layouts of 10 open source designs using the SY8089A1AAC.
How is the SY8089A1AAC IN_4 pin connected?
The IN_4 pin is tied to 5V on 7 of 9 designs (a signal on 2). Counted from the KiCad layouts of 10 open source designs using the SY8089A1AAC.
What parts are used alongside the SY8089A1AAC?
The USBLC6-2SC6, CH340K, ESP32-WROOM-32UE-N16, LAN8710A-EZC-TR and TX4138 appear in the most repositories here.
Which microcontrollers do boards using the SY8089A1AAC use?
Most are built on ESP32 (11) and RP2040/RP2350 (1).
How big is a typical board using the SY8089A1AAC?
The median is 110.7 × 67.8 mm, and 21% are two-layer designs.
What is the most popular open source board using the SY8089A1AAC?
By GitHub stars, WebScreen-PCB by HW-Lab-Hardware-Design-Agency, with 13 stars.
Can I simulate one of these boards using the SY8089A1AAC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.