Post route
Hive-RSI-Lab·hive-pcb-flow·pinned/ultra-front/routing/post-route.kicad_pcb
About the Post route PCB
Post route is an open source PCB design by Hive-RSI-Lab, published on GitHub under the MIT license. It is a 2-layer board measuring 110 × 40 mm, with 36 components from 20 distinct parts.
Other key parts include the TCA9535PWR and IRM-H638T/TR2. By type, the board carries 19 resistors, 7 capacitors, 4 switches, 2 ICs, 2 connectors and 1 transistor.
From the project
pcb-flow: KiCad PCB design from a written brief to a fab package, as a Hive module (formerly hwde).
The front panel of the hifi-receiver-2 Ultra tier (see docs/product.md): a 2-layer 110 x 40 mm board carrying the 2.0" colour screen, the volume knob, three buttons, the IR remote receiver and an RGB status LED. It has no processor: the core board's ESP32 drives everything over one 20-pin FFC cable. Designed with the hive-hwde module on 2026-10-28, from schematic through routed layout to a JLC fab package. Nothing has been ordered; ordering is the person's.
Main components on the Post route
Post route bill of materials (BOM)
36 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCA9535PWR | TSSOP-24_L7.8-W4.4-P0.65-LS6.4-BL | U1 |
| 1 | IRM-H638T/TR2 | SENSOR-SMD_IRM-H638T-TR2-TL | U2 |
| 1 | AO3400A | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q1 |
| 1 | PZ254V-11-02P FPC-05F-20PH20 | FPC-SMD_20P-P0.50_XUNPU_FPC-05F-20PH20 | J1 |
| 1 | FPC-05FB-12PH20 | FPC-SMD_12P-P0.50_XUNPU_FPC-05FB-12PH20 | J2 |
| 3 | TS-1187A-B-A-B | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1, SW2, SW3 |
| 1 | EC11E1834403 | SW-TH_EC11E1820402 | SW4 |
| 1 | KT-0603G TJ-S1615SW6TGLCCYRGB-A5 | LED-SMD_4P-L1.6-W1.5-TR | D1 |
| 1 | CL10A475KO8NNNC 100nF | C0603 | C1 |
| 2 | 10uF | C0805 | C2, C3 |
| 1 | 100nF | C0603 | C4 |
| 1 | 4.7uF | C0603 | C5 |
| 2 | 10nF | C0603 | C6, C7 |
| 1 | 0603WAF4700T5E 10k | R0603 | R1 |
| 9 | 10k | R0603 | R2, R3, R4, R5, R6, R7, R8, R9 +1 |
| 2 | 100R | R0603 | R10, R12 |
| 1 | 100k | R0603 | R11 |
| 3 | 120R | R0603 | R13, R17, R18 |
| 1 | 1k | R0603 | R14 |
| 2 | 680R | R0603 | R15, R16 |
Post route design files
The KiCad project lives in the Hive-RSI-Lab/hive-pcb-flow repository on GitHub; these links point at the commit this page was built from.
Post route: common questions
How big is the Post route PCB?
The Post route measures 110 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Post route?
36 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Post route design files?
From the Hive-RSI-Lab/hive-pcb-flow repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Post route design in my own project?
Yes, under the terms of its MIT license, which Hive-RSI-Lab chose for the repository.
More boards in hive-pcb-flow
ESP32
Core
Hive-RSI-Lab
120 × 100 mm297 parts4LMIT1ESP32
Lite main
Hive-RSI-Lab
100 × 90 mm145 parts2LMIT1ESP32
Minuet Fan Controller
Hive-RSI-Lab
79 × 79 mm76 parts2LMIT1ESP32
Terrarium Control Board
Hive-RSI-Lab
140 × 140 mm51 parts2LMIT1Pre route
Hive-RSI-Lab
110 × 40 mm36 parts2LMIT1Ultra front
Hive-RSI-Lab
110 × 40 mm36 parts2LMIT1Post route auto
Hive-RSI-Lab
110 × 40 mm36 parts2LMIT1RP2040/RP2350
Digits
Hive-RSI-Lab
76.2 × 56.9 mm19 parts2LMIT1Hwde led test
Hive-RSI-Lab
13.4 × 10.5 mm4 parts2LMIT1