Digits

Hive-RSI-Lab·hive-pcb-flow·pinned/digits-v1/kicad/digits-pcb.kicad_pcb

Digits PCB layout, top view — open source RP2040/RP2350 board by Hive-RSI-Lab

About the Digits PCB

Digits is an open source RP2040/RP2350 PCB design by Hive-RSI-Lab, published on GitHub under the MIT license. It is a 2-layer board measuring 76.2 × 56.9 mm, with 19 components from 19 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the LM2596S-5. By type, the board carries 10 connectors, 3 capacitors, 1 IC, 1 module, 1 switch and 1 diode.

From the project

pcb-flow: KiCad PCB design from a written brief to a fab package, as a Hive module (formerly hwde).

The pcb-flow module: KiCad hardware design for the Hive, in the Hive org like the other modules. It began as ihsan-sa/pcb-flow's Claude Code skill and is its own now (where it came from).

An agent designs a PCB from a written brief: research, architecture, parts, schematic, placement, routing, then the checks (ERC, DRC, the verify suite, JLCPCB DFM on the exported Gerbers), ending in a fab package. The person signs off between stages. Ordering and paying are always the person's.

Main components on the Digits

Digits bill of materials (BOM)

19 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM2596S-5
U1
1
RaspberryPi_Pico
A1
1
PZ254V-11-02P
Conn_02x20_Odd_Even
J1
1
Conn_01x03
J2
1
Barrel_Jack_Switch
J3
1
Conn_01x07
J4
1
Conn_01x04
J5
1
Conn_01x02
J6
1
Screw_Terminal_01x02
J7
1
Conn_01x04
J8
1
Conn_01x03
J9
1
Conn_01x02
J10
1
SW_Push
SW1
1
KT-0603G
1N5824
D1
1
33uH
L1
1
CL10A475KO8NNNC
680uF
C1
1
220uF
C2
1
100nF
C3
1
0603WAF4700T5E
220
R1

Digits design files

The KiCad project lives in the Hive-RSI-Lab/hive-pcb-flow repository on GitHub; these links point at the commit this page was built from.

Digits: common questions

What microcontroller does the Digits use?

The Digits is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Digits PCB?

The Digits measures 76.2 × 56.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Digits?

19 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Digits design files?

From the Hive-RSI-Lab/hive-pcb-flow repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Digits design in my own project?

Yes, under the terms of its MIT license, which Hive-RSI-Lab chose for the repository.

Can I test firmware for the Digits without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in hive-pcb-flow

Similar boards