Terrarium Control Board

Hive-RSI-Lab·hive-pcb-flow·pinned/oasis-v0-2/kicad/pcb.kicad_pcb

Terrarium Control Board layout, top view — open source ESP32 board by Hive-RSI-Lab

About the Terrarium Control Board

Terrarium Control Board is an open source ESP32 PCB design by Hive-RSI-Lab, published on GitHub under the MIT license. It is a 2-layer board measuring 140 × 140 mm, with 51 components from 30 distinct parts.

Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the SHT30-DIS, IX4427N and LMR54406DBVR. By type, the board carries 14 resistors, 6 capacitors, 5 diodes, 4 ICs, 2 transistors and 2 connectors.

From the project

pcb-flow: KiCad PCB design from a written brief to a fab package, as a Hive module (formerly hwde).

The pcb-flow module: KiCad hardware design for the Hive, in the Hive org like the other modules. It began as ihsan-sa/pcb-flow's Claude Code skill and is its own now (where it came from).

An agent designs a PCB from a written brief: research, architecture, parts, schematic, placement, routing, then the checks (ERC, DRC, the verify suite, JLCPCB DFM on the exported Gerbers), ending in a fab package. The person signs off between stages. Ordering and paying are always the person's.

Main components on the Terrarium Control Board

Terrarium Control Board bill of materials (BOM)

51 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-WROOM-02-N4
U1
1
SHT30-DIS
U4
1
IX4427N
U5
1
LMR54406DBVR
U6
2
Q_NMOS_GDS
Q1, Q3
1
USB_B_Micro
J2
1
Conn_01x06
J3
1
100nF
Cboot1
3
1uF
Cin1, Cin2, Cin3
1
100nF
Cinx1
2
10uF
Cout1, Cout2
1
LDD-700LS
PS1
1
22.1k
Rfbb1
1
69.8k
Rfbt1
2
SW_Push
boot1, en1
2
Conn_01x02
fan1, fan2
1
Conn_01x02
mister1
1
LED
status_led1
1
KT-0603G
LED_Pad
D1
4
LED_Pad
D2, D3, D4, D5
Show 10 more
QtyPartRefs
1
330uH
L1
1
10uH
L3
1
CL10A475KO8NNNC
.1uF
C1
4
.1uF
C2, C3, C4, C6
1
10uF
C5
1
0603WAF4700T5E
470
R1
9
10k
R2, R3, R5, R7, R8, R9, R10, R11 +1
2
4.7k
R4, R15
1
10
R6
1
1k
R13

Terrarium Control Board design files

The KiCad project lives in the Hive-RSI-Lab/hive-pcb-flow repository on GitHub; these links point at the commit this page was built from.

Terrarium Control Board: common questions

What microcontroller does the Terrarium Control Board use?

The Terrarium Control Board is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.

How big is the Terrarium Control Board?

The Terrarium Control Board measures 140 × 140 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Terrarium Control Board?

51 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Terrarium Control Board design files?

From the Hive-RSI-Lab/hive-pcb-flow repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Terrarium Control Board design in my own project?

Yes, under the terms of its MIT license, which Hive-RSI-Lab chose for the repository.

Can I test firmware for the Terrarium Control Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in hive-pcb-flow

Similar boards