Minuet Fan Controller
Hive-RSI-Lab·hive-pcb-flow·pinned/minuet-v3/kicad/minuet.kicad_pcb
About the Minuet Fan Controller PCB
Minuet Fan Controller is an open source ESP32 PCB design by Hive-RSI-Lab, published on GitHub under the MIT license. It is a 2-layer board measuring 79 × 79 mm, with 76 components from 44 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the TSOP39238, LMV331IDCK, TCA9555RTW, MCF8316D and DRV8876PWP. By type, the board carries 25 resistors, 23 capacitors, 12 connectors, 6 ICs, 2 switches and 2 diodes.
From the project
pcb-flow: KiCad PCB design from a written brief to a fab package, as a Hive module (formerly hwde).
The pcb-flow module: KiCad hardware design for the Hive, in the Hive org like the other modules. It began as ihsan-sa/pcb-flow's Claude Code skill and is its own now (where it came from).
An agent designs a PCB from a written brief: research, architecture, parts, schematic, placement, routing, then the checks (ERC, DRC, the verify suite, JLCPCB DFM on the exported Gerbers), ending in a fab package. The person signs off between stages. Ordering and paying are always the person's.
Main components on the Minuet Fan Controller
Minuet Fan Controller bill of materials (BOM)
76 components, 44 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TSOP39238 | TSOP39238_Standoff | U1 |
| 1 | LMV331IDCK | SOT-353_SC-70-5 | U2 |
| 1 | TCA9555RTW | WQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm | U3 |
| 1 | ESP32-C3-WROOM-02-N4 | ESP32-C3-WROOM-02 | U4 |
| 1 | MCF8316D | MCF8316D | U5 |
| 1 | DRV8876PWP | IC_DRV8876PWPR | U6 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 1 | PZ254V-11-02P B2P-VH-B | JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical | J1 |
| 4 | B2B-XH-A | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2, J3, J5, J9 |
| 1 | PPPC082LFBN-RC | PinSocket_2x08_P2.54mm_Vertical | J4 |
| 1 | USB4105-GF-A | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J6 |
| 1 | SM04B-SRSS-TB | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J7 |
| 1 | B3P-VH-B | JST_VH_B3P-VH-B_1x03_P3.96mm_Vertical | J8 |
| 1 | G800LE300018YEU | PinHeader_1x08_P2.54mm_Vertical | J10 |
| 1 | MTJ-889X1 | CONN_MTJ-889X1_ADM | J11 |
| 1 | MTJ-669X1 | CONN_MTJ-669X1_ADM | J12 |
| 1 | PS1240P02BT | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | RGEF400K | RGEF400K | F1 |
| 1 | 5K | TRIM_3362P-1-502LF | RV1 |
| 2 | EVQ-P7A01P | SW_SPST_EVQP7A | SW1, SW2 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS561201DDCR | SOT95P280X110-6N | VR1 |
| 1 | KT-0603G SMF16A | D_SMF | D1 |
| 1 | PESD3V3S2UT | SOT-23 | D2 |
| 1 | 3.3u | L_1008_2520Metric | L1 |
| 1 | CL10A475KO8NNNC 680u | CP_Radial_D8.0mm_P3.50mm | C1 |
| 9 | 100n | C_0603_1608Metric | C2, C4, C6, C7, C8, C10, C14, C20 +1 |
| 2 | 22u | C_0805_2012Metric | C3, C13 |
| 1 | 47u | C_0805_2012Metric | C5 |
| 1 | 10u | C_0805_2012Metric | C9 |
| 1 | 10p | C_0603_1608Metric | C11 |
| 4 | 1u | C_0603_1608Metric | C12, C15, C17, C18 |
| 1 | 47n | C_0603_1608Metric | C16 |
| 1 | 2.2u | C_0805_2012Metric | C19 |
| 1 | 22n | C_0603_1608Metric | C22 |
| 1 | 10n | C_0603_1608Metric | C23 |
| 1 | 0603WAF4700T5E 10K | R_0603_1608Metric | R1 |
| 4 | 100K | R_0603_1608Metric | R2, R9, R11, R13 |
| 1 | 1K | R_0603_1608Metric | R3 |
| 1 | 33.2K | R_0603_1608Metric | R4 |
| 13 | 10K | R_0603_1608Metric | R5, R6, R7, R8, R12, R15, R16, R17 +5 |
| 1 | 68K | R_0603_1608Metric | R10 |
| 1 | 1M | R_0603_1608Metric | R14 |
| 2 | 5.1K | R_0603_1608Metric | R18, R20 |
| 1 | 51K | R_0603_1608Metric | R24 |
Minuet Fan Controller design files
The KiCad project lives in the Hive-RSI-Lab/hive-pcb-flow repository on GitHub; these links point at the commit this page was built from.
Minuet Fan Controller: common questions
What microcontroller does the Minuet Fan Controller use?
The Minuet Fan Controller is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.
How big is the Minuet Fan Controller PCB?
The Minuet Fan Controller measures 79 × 79 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Minuet Fan Controller?
76 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Minuet Fan Controller design files?
From the Hive-RSI-Lab/hive-pcb-flow repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Minuet Fan Controller design in my own project?
Yes, under the terms of its MIT license, which Hive-RSI-Lab chose for the repository.
Can I test firmware for the Minuet Fan Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in hive-pcb-flow
ESP32
Core
Hive-RSI-Lab
120 × 100 mm297 parts4LMIT1ESP32
Lite main
Hive-RSI-Lab
100 × 90 mm145 parts2LMIT1ESP32
Terrarium Control Board
Hive-RSI-Lab
140 × 140 mm51 parts2LMIT1Post route
Hive-RSI-Lab
110 × 40 mm36 parts2LMIT1Post route auto
Hive-RSI-Lab
110 × 40 mm36 parts2LMIT1Pre route
Hive-RSI-Lab
110 × 40 mm36 parts2LMIT1Ultra front
Hive-RSI-Lab
110 × 40 mm36 parts2LMIT1RP2040/RP2350
Digits
Hive-RSI-Lab
76.2 × 56.9 mm19 parts2LMIT1Hwde led test
Hive-RSI-Lab
13.4 × 10.5 mm4 parts2LMIT1
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k