Starbie
hk-vector·starbie·Hardware/Starbie.kicad_pcb
About the Starbie PCB
Starbie is an open source ESP32 PCB design by hk-vector, published on GitHub under the MIT license. It is a 2-layer board measuring 97.7 × 82.7 mm, with 7 components from 6 distinct parts.
Its main chip is the GY-521, from the ESP32 family. Other key parts include the 102010428. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the sensors and displays & leds designs in this gallery.
From the project
Starbie is a tiny motion-controlled digital pet: basically a desktop Tamagotchi with minimal gameplay buttons. Instead of pressing controls, you interact with it by physically moving the board.
Starbie is a star-shaped interactive desktop companion PCB powered by the Seeed Studio XIAO ESP32C3 microcontroller. Featuring an OLED display, motion/tilt control via an IMU, environmental tracking, and custom tactile buttons, Starbie functions as an animated virtual pet with responsive behaviors and radial menu controls.
Microcontroller: Seeed Studio XIAO ESP32C3 Display: 0.96" I2C Monochrome OLED Display ($128 \times 64$ resolution, SSD1306) Motion Sensor: MPU6050 6-Axis Gyroscope & Accelerometer Environmental Sensor: DHT11 Temperature & Humidity Sensor Input Controls: 2x Tactile…

Main components on the Starbie
Starbie bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 102010428 DHT11 Seeed Studio | Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | GY-521 XIAO-ESP32-C3-SMD InvenSense / Generic | XIAO-ESP32-C6-DIP | U2 |
| 1 | PPPC071LFBN-RC Conn_01x04_Pin Sullins / Generic | Display_128x64_096_I2C | J1 |
| 1 | PPPC071LFBN-RC Conn_01x08_Pin Sullins / Generic | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | PTS645 SW_Push C&K / Generic | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | RC0805FR-0710KL 10k Yageo | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Starbie design files
The KiCad project lives in the hk-vector/starbie repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware/Starbie.kicad_pcb
- SchematicHardware/Starbie.kicad_sch
- BOMFabrication/bom.csv
Starbie: common questions
What microcontroller does the Starbie use?
The Starbie is built around the GY-521, from the ESP32 family.
How big is the Starbie PCB?
The Starbie measures 97.7 × 82.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Starbie?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Starbie design files?
From the hk-vector/starbie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Starbie design in my own project?
Yes, under the terms of its MIT license, which hk-vector chose for the repository.
Can I test firmware for the Starbie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k