10 open source boards using the 102010428

Real designs built with the 102010428, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the 102010428

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 102010428 connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3_12 pin is tied to 3.3V on 6 of 9 designs (not connected on 3).
3V3_12pin 12Connected to: 3.3V 67% · not connected 33%
GND_13pin 13Connected to: GND 100%

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EEGFrontier by TheusHen, OreSat Solar Simulator by oresat, Kenwood rj45-usb ptt by AugusDogus and Hackpad by draarivpatel-ui.

The 102010428 in open source designs

The gallery holds 10 open source boards using the 102010428 from 10 GitHub repositories; a typical one measures about 77.6 × 54.5 mm and carries around 20 components.

90% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is EEGFrontier by TheusHen.

Microcontrollers on boards using the 102010428

What boards using the 102010428 are built for

102010428: common questions

Where can I find a 102010428 reference design?

Each of the 10 boards on this page is a real design using the 102010428. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 102010428 3V3_12 pin connected?

The 3V3_12 pin is tied to 3.3V on 6 of 9 designs (not connected on 3). Counted from the KiCad layouts of 10 open source designs using the 102010428.

Which microcontrollers do boards using the 102010428 use?

Most are built on RP2040/RP2350 (2) and ESP32 (1).

How big is a typical board using the 102010428?

The median is 77.6 × 54.5 mm, and 90% are two-layer designs.

What is the most popular open source board using the 102010428?

By GitHub stars, EEGFrontier by TheusHen, with 102 stars.

Can I simulate one of these boards using the 102010428 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part