12 open source boards using the GY-521
Real designs built with the GY-521, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Micromouse
opatiny
110 × 110 mm35 parts2LCERN-OHL-P-2.015AVR/Arduino
Agnosticbox
chihauccisoilconte
83.7 × 74.4 mm18 parts2LNo license1ESP32
Eightbots
YuseiIto
99 × 74 mm37 parts2LGPL-3.00ESP32
Minidrone fc
yisikawa
50 × 64 mm37 parts4LNo license0ESP32
Posture
zeyad-hisham-cyper
98.2 × 64.7 mm27 parts2LNo license0ESP32
Goat-Drone
joelmathewsssss
38 × 38 mm24 parts2LNo license0ESP32
MCU breakout board
RudrakshKavari107
139 × 115 mm23 parts2LNo license0AVR/Arduino
ArduinoLightsaber
BamdadKh
25 × 100 mm11 parts2LMIT0ESP32
Starbie
hk-vector
97.7 × 82.7 mm7 parts2LMIT0AirPoint-ESP32-Mouse
sudipbandale2010-pixel
170.3 × 56.4 mm6 parts2LMIT0ESP32
Bulma
eesakiii
100 × 85 mm77 parts2LNo license0ESP32
Car alarm
zeyad-hisham-cyper
100 × 60 mm17 parts2LNo license0
How designs wire the GY-521
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the GY-521 connects to, and the resistors, capacitors and other passives placed on it.
- The XCL pins is left unconnected on 10 of 11 designs.
- The XDA pins is left unconnected on 10 of 11 designs.
- The INT pins is left unconnected on 9 of 11 designs (a signal on 2).
- The ADO pins is left unconnected on 8 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1, VCC | Connected to: 3.3V 82% | — |
| GNDpin 2, GND | Connected to: GND 82% · a signal 18% | — |
| XCLpin 5, XCL | Connected to: Not connected 91% | — |
| XDApin 6, XDA | Connected to: Not connected 91% | — |
| ADOpin 7, ADO | Connected to: Not connected 100% | — |
| INTpin 8, INT | Connected to: Not connected 82% · a signal 18% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Micromouse by opatiny, Agnosticbox by chihauccisoilconte, ArduinoLightsaber by BamdadKh and Bulma by eesakiii.
The GY-521 in open source designs
The gallery holds 12 open source boards using the GY-521 from 11 GitHub repositories; a typical one measures about 98.6 × 74.2 mm and carries around 24 components.
92% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.
The most starred is Micromouse by opatiny.
Microcontrollers on boards using the GY-521
What boards using the GY-521 are built for
GY-521: common questions
Where can I find a GY-521 reference design?
Each of the 12 boards on this page is a real design using the GY-521. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the GY-521 XCL pin connected?
The XCL pins is left unconnected on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the GY-521.
How is the GY-521 XDA pin connected?
The XDA pins is left unconnected on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the GY-521.
How is the GY-521 INT pin connected?
The INT pins is left unconnected on 9 of 11 designs (a signal on 2). Counted from the KiCad layouts of 11 open source designs using the GY-521.
Which microcontrollers do boards using the GY-521 use?
Most are built on ESP32 (9) and AVR/Arduino (2).
How big is a typical board using the GY-521?
The median is 98.6 × 74.2 mm, and 92% are two-layer designs.
What is the most popular open source board using the GY-521?
By GitHub stars, Micromouse by opatiny, with 15 stars.
Can I simulate one of these boards using the GY-521 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.