MIPI Robot Nextgen

hminhphi·MIPI_Robot_Nextgen·pcb/MIPI_Nextgen_v2.kicad_pcb

MIPI Robot Nextgen PCB layout, top view — open source ESP32 board by hminhphi

About the MIPI Robot Nextgen PCB

MIPI Robot Nextgen is an open source ESP32 PCB design by hminhphi, published on GitHub. It is a 2-layer board measuring 76 × 52 mm, with 51 components from 27 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3, TCA9548APWR, MPU6050, RIGHT DRV8313 and LEFT DRV8313. By type, the board carries 20 resistors, 12 capacitors, 11 connectors, 7 ICs and 1 diode.

It belongs with the robotics & motion, iot & wireless and sensors designs in this gallery.

From the project

A self-balancing two-wheeled robot with ESP32-S3, featuring advanced motion control, BLE connectivity, and Flutter mobile app control.

A self-balancing two-wheeled robot with ESP32-S3, featuring advanced motion control, BLE connectivity, and Flutter mobile app control.

MIPIRobot NextGen is a sophisticated self-balancing robot built on the ESP32-S3 microcontroller. It implements cascaded PID control for balance, position, and direction control, with real-time IMU sensor fusion and SimpleFOC motor control. The robot can be controlled via BLE from a Flutter-based mobile application.

MIPI Robot Nextgen, from the project README
From the project README

Main components on the MIPI Robot Nextgen

MIPI Robot Nextgen bill of materials (BOM)

51 components, 27 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
ESP32-S3-WROOM-1
U2
1
TCA9548APWR
U3
1
MPU6050
U4
1
RIGHT DRV8313
U5
1
LEFT DRV8313
U6
1
~
U7
1
~
CN1
1
USB_C_Receptacle_USB2.0_16P
J1
1
Left AS5600
J2
1
Right AS5600
J3
1
Conn_01x04_Socket
J4
1
Left Servo
J6
1
Right Servo
J7
1
UART
J8
1
Power
J9
1
RIGHT BLDC
J10
1
Left BLDC
J11
1
WS2812B
D1
2
22uF
C1, C3
Show 7 more
QtyPartRefs
1
10uF
C2
6
100nF
C4, C6, C7, C8, C11, C12
1
1uF
C5
2
100nF
C9, C10
17
10K
R1, R5, R6, R7, R8, R9, R10, R11 +9
1
100R
R2
2
5.1K
R3, R4

MIPI Robot Nextgen design files

The KiCad project lives in the hminhphi/MIPI_Robot_Nextgen repository on GitHub; these links point at the commit this page was built from.

MIPI Robot Nextgen: common questions

What microcontroller does the MIPI Robot Nextgen use?

The MIPI Robot Nextgen is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the MIPI Robot Nextgen PCB?

The MIPI Robot Nextgen measures 76 × 52 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MIPI Robot Nextgen?

51 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the MIPI Robot Nextgen design files?

From the hminhphi/MIPI_Robot_Nextgen repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MIPI Robot Nextgen design in my own project?

The repository has no license, so all rights stay with hminhphi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MIPI Robot Nextgen without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards