GNSS-viewer
hnz1102·GNSS-viewer·hw/GNSS-satellite-viewer.kicad_pcb
About the GNSS-viewer PCB
GNSS-viewer is an open source ESP32 PCB design by hnz1102, published on GitHub. It is a 4-layer board measuring 100 × 50.1 mm, with 68 components from 40 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the ST7789V_TFT_DISPLAY_8P, FEMC064G-M11, MAX-F10S-00B, SPX3819M5-L and MCP73831T-2ATI/OT. By type, the board carries 24 resistors, 18 capacitors, 6 ICs, 5 switches, 4 connectors and 4 diodes.
It belongs with the rf & radio, iot & wireless and power & battery designs in this gallery.
From the project
GNSS Satellite Viewer
ESP32-S3 firmware for a handheld GNSS receiver display built around a u-blox MAX-F10S module. It decodes the receiver's NMEA output and shows the fix, satellite constellation, a live map and recorded tracks on a 320×240 colour TFT, and serves the same data over Wi-Fi to a browser. Written in Rust (esp-idf-hal / esp-idf-svc) with a C component (wolfSSH) for an SSH console to the receiver.

Main components on the GNSS-viewer
GNSS-viewer bill of materials (BOM)
68 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16R8 | ESP32-S3-WROOM-1_EXP | U1 |
| 1 | ST7789V_TFT_DISPLAY_8P | ST7789V TFT SPI DISPLAY 320x240 GMT020-02-8P | U2 |
| 1 | FEMC064G-M11 EM64VSUKN-BA000-2 | EM32VSUKN FPGA153 | U3 |
| 1 | MAX-F10S-00B | MAX-F10S_UBL | U4 |
| 1 | SPX3819M5-L | SOT-23-5 | U5 |
| 1 | MCP73831T-2ATI/OT MCP73831-2-OT | SOT-23-5 | U6 |
| 1 | 2N7002K | SOT-23 | Q1 |
| 1 | SSM6L56FE_LM | SOT-563ES6_TOS | Q2 |
| 1 | SSM3J332R | SOT-23 | Q3 |
| 1 | 32.7680KHZ 32.7680KHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 2 | U.FL-R-SMT-1 Conn_Coaxial | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1, J2 |
| 1 | USB4105-GF-A | USB_C_5077CR-16-SMC2-BK-TR | J3 |
| 1 | B2B-PH-K-S LiPo BATTERY | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J4 |
| 1 | PAGE/BOOT | SW_PUSH_6mm_H8mm | SW1 |
| 1 | ZOOM-IN | SW_PUSH_6mm_H8mm | SW2 |
| 1 | MODE | SW_PUSH_6mm_H8mm | SW3 |
| 1 | ZOOM-OUT | SW_PUSH_6mm_H8mm | SW4 |
| 1 | SLIDE_SW | SLIDE_SW_IS1235-G | SW5 |
| 1 | LED BLUE | LED_0603_1608Metric | D1 |
| 1 | CUS10F30 | D_SOD-323 | D2 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED RED | LED_0603_1608Metric | D3 |
| 1 | LED GREEN | LED_0603_1608Metric | D4 |
| 2 | MH2029-601Y | L_0805_2012Metric | FB1, FB2 |
| 1 | 47NH 47nH | L_0603_1608Metric | L1 |
| 2 | 16PF 16pF | C_0603_1608Metric | C1, C3 |
| 9 | 0.1UF 0.1uF | C_0603_1608Metric | C2, C4, C5, C6, C7, C8, C11, C13 +1 |
| 3 | 1UF 1uF | C_0805_2012Metric | C9, C10, C18 |
| 1 | 10NF 10nF | C_0603_1608Metric | C12 |
| 2 | 10UF 10uF | C_0805_2012Metric | C14, C17 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric | C16 |
| 3 | 20K 1% | R_0603_1608Metric | R1, R2, R20 |
| 6 | 10K | R_0603_1608Metric | R3, R4, R5, R8, R9, R12 |
| 4 | 1K | R_0603_1608Metric | R6, R7, R10, R11 |
| 3 | 330 | R_0603_1608Metric | R13, R23, R24 |
| 2 | 100K | R_0603_1608Metric | R14, R22 |
| 1 | 10 1/4W | R_0805_2012Metric | R15 |
| 1 | 49.9 | R_0603_1608Metric | R16 |
| 2 | 5.1K | R_0603_1608Metric | R17, R18 |
| 1 | 2K | R_0603_1608Metric | R19 |
| 1 | 12K 1% | R_0603_1608Metric | R21 |
GNSS-viewer design files
The KiCad project lives in the hnz1102/GNSS-viewer repository on GitHub; these links point at the commit this page was built from.
GNSS-viewer: common questions
What microcontroller does the GNSS-viewer use?
The GNSS-viewer is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.
How big is the GNSS-viewer PCB?
The GNSS-viewer measures 100 × 50.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the GNSS-viewer?
68 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GNSS-viewer design files?
From the hnz1102/GNSS-viewer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GNSS-viewer design in my own project?
The repository has no license, so all rights stay with hnz1102. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the GNSS-viewer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k