2 open source boards using the ST7789V_TFT_DISPLAY_8P

Real designs built with the ST7789V_TFT_DISPLAY_8P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The ST7789V_TFT_DISPLAY_8P in open source designs

The gallery holds 2 open source boards using the ST7789V_TFT_DISPLAY_8P from 2 GitHub repositories; a typical one measures about 100 × 50 mm and carries around 68 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is GNSS-viewwer by hnz1102.

Microcontrollers on boards using the ST7789V_TFT_DISPLAY_8P

What boards using the ST7789V_TFT_DISPLAY_8P are built for

ST7789V_TFT_DISPLAY_8P: common questions

Where can I find a ST7789V_TFT_DISPLAY_8P reference design?

Each of the 2 boards on this page is a real design using the ST7789V_TFT_DISPLAY_8P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ST7789V_TFT_DISPLAY_8P?

The ESP32-S3-WROOM-1-N16R8, FEMC064G-M11, MAX-F10S-00B, MCP73831T-2ATI/OT and SPX3819M5-L appear in the most repositories here.

Which microcontrollers do boards using the ST7789V_TFT_DISPLAY_8P use?

Most are built on ESP32 (2).

How big is a typical board using the ST7789V_TFT_DISPLAY_8P?

The median is 100 × 50 mm, and 0% are two-layer designs.

What is the most popular open source board using the ST7789V_TFT_DISPLAY_8P?

By GitHub stars, GNSS-viewwer by hnz1102, with 0 stars.

Can I simulate one of these boards using the ST7789V_TFT_DISPLAY_8P before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part