6502 adapter
About the 6502 adapter PCB
6502 adapter is an open source PCB design by hoglet67, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 49 × 75.2 mm, with 57 components from 16 distinct parts.
Other key parts include the WD65C02, 74LVC4245 and 74LV1T125. By type, the board carries 20 resistors, 15 capacitors, 9 ICs, 5 diodes, 3 connectors and 2 switches.
It belongs with the retro computing designs in this gallery.
From the project
This project is an open-source In-Circuit Emulator for the 6502, 65C02, Z80, 6809 and 6809E 8-bit processors.
This project is an open-source In-Circuit Emulator for the 6502, 65C02, Z80, 6809 and 6809E 8-bit processors.
For further details see the GitHub Project Wiki: https://github.com/hoglet67/AtomBusMon/wiki
If you have any questions or feedback, please join in the discussion thread at stardot.org.uk: http://stardot.org.uk/forums/viewtopic.php?f=44&t=9655
Main components on the 6502 adapter
6502 adapter bill of materials (BOM)
57 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | WD65C02 | dip40_smt_header | U1 |
| 5 | 74LVC4245 | SOIC-24W_7.5x15.4mm_Pitch1.27mm | U2, U3, U4, U5, U6 |
| 3 | 74LV1T125 | SOT-23-5_HandSoldering | U7, U8, U9 |
| 2 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | P1, P2 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Horizontal | P3 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Horizontal | LK1 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Horizontal | LK2, LK3 |
| 2 | SW_Push | SW_Tactile_SKHH_Angled | SW1, SW2 |
| 3 | LED | LED_D3.0mm | D1, D2, D3 |
| 2 | PMEG3010BEA | D_SOD-323_HandSoldering | D4, D5 |
| 12 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +4 |
| 2 | 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C13, C14 |
| 1 | 0 | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C15 |
| 12 | 22K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R15, R16 +4 |
| 3 | 330 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8, R9 |
| 5 | 0 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R11, R12, R13, R14 |
6502 adapter design files
The KiCad project lives in the hoglet67/ElectronFpga repository on GitHub; these links point at the commit this page was built from.
6502 adapter: common questions
How big is the 6502 adapter PCB?
The 6502 adapter measures 49 × 75.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 6502 adapter?
57 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the 6502 adapter design files?
From the hoglet67/ElectronFpga repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 6502 adapter design in my own project?
Yes, under the terms of its GPL-3.0 license, which hoglet67 chose for the repository.
More boards in ElectronFpga
Similar boards
OpenTendo
Redherring32
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.0850
MCL86jr
MicroCoreLabs
56.1 × 57.1 mm66 parts4LNo license532
24pin flex interposer
Wren6991
29 × 32 mm3 parts2LNo license508
Sram dev board
50 × 50 mm12 parts2LNo license508
TRS-80 Color Computer 3
baldengineer
280 × 155.3 mm204 parts2LCC-BY-4.0442
Commodore Plus 4
284.7 × 158.9 mm212 parts2LCC-BY-4.0442