OHBeacon
HoldenHalucha·office-hours-beacon·hardware/OHBeacon/OHBeacon.kicad_pcb
About the OHBeacon PCB
OHBeacon is an open source ESP32 PCB design by HoldenHalucha, published on GitHub. It is a 2-layer board measuring 90 × 65 mm, with 53 components from 24 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the AP2112K-3.3 and MCP73831-2-OT. By type, the board carries 16 capacitors, 14 resistors, 10 diodes, 7 connectors, 3 ICs and 2 switches.
From the project
EECS 473
Main components on the OHBeacon
OHBeacon bill of materials (BOM)
53 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | MCP73831-2-OT | SOT-23-5 | U4 |
| 1 | AO3400A | SOT-23 | Q2 |
| 4 | CONN_01X01_PIN Conn_01x01_Pin | SolderWire-1sqmm_1x01_D1.4mm_OD3.9mm | J1, J2, J3, J4 |
| 1 | USB_C_RECEPTACLE_POWERONLY_6P USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J5 |
| 1 | CONN_01X04_SOCKET Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | S2B-ZR-SM4A-TF | JST_S2B-ZR-SM4A-TF | P1 |
| 1 | EN | SW_PUSH_6mm | SW1 |
| 1 | I09 | SW_PUSH_6mm | SW2 |
| 8 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | GREEN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D9 |
| 1 | RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D10 |
| 11 | 0.1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +3 |
| 3 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C13, C14 |
| 2 | 1.0UF 1.0uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C16 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R8 |
| 3 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4 |
| 2 | 5K1 5k1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 1 | 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 3 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12 |
| 1 | 500 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R100 |
OHBeacon design files
The KiCad project lives in the HoldenHalucha/office-hours-beacon repository on GitHub; these links point at the commit this page was built from.
OHBeacon: common questions
What microcontroller does the OHBeacon use?
The OHBeacon is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the OHBeacon PCB?
The OHBeacon measures 90 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OHBeacon?
53 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OHBeacon design files?
From the HoldenHalucha/office-hours-beacon repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OHBeacon design in my own project?
The repository has no license, so all rights stay with HoldenHalucha. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the OHBeacon without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in office-hours-beacon
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k