HardLabs

Project5-ESP32-WROOM-PZEM

HowardsPlayPen·Project5-ESP32-WROOM-PZEM·Hardware/ESP32-WROOM-generic.kicad_pcb

Project5-ESP32-WROOM-PZEM PCB layout, top view — open source ESP32 board by HowardsPlayPen

About the Project5-ESP32-WROOM-PZEM PCB

Project5-ESP32-WROOM-PZEM is an open source ESP32 PCB design by HowardsPlayPen, published on GitHub. It is a 2-layer board measuring 95 × 70 mm, with 45 components from 31 distinct parts.

Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the AMS1117-3.3, FT232RL, RFM69HW, TFT-LED_1_69_240x280 and FPC_TFT_LED_1_69_240x280. By type, the board carries 13 connectors, 9 capacitors, 8 resistors, 7 ICs, 4 diodes and 2 jumpers.

It belongs with the iot & wireless designs in this gallery.

From the project

ESP32 Wroom based board for connecting to PZEM board to monitor 240V

Using an ESP32-WROOM + RFM69HW + PZEM + pinouts for a few different LED screens.

Test out various different circuits - including touch buttons connected to ESP32 pins (I read that they could work as capacitative buttons)

It includes a connector for PZEM - i.e. ability to monitor 240V power use.

Project5-ESP32-WROOM-PZEM, from the project README
From the project README

Main components on the Project5-ESP32-WROOM-PZEM

ESP32-WROOM-32DAMS1117-3.3FT232RLRFM69HWTFT-LED_1_69_240x280FPC_TFT_LED_1_69_240x280

Project5-ESP32-WROOM-PZEM bill of materials (BOM)

45 components, 31 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32D
U1
2
AMS1117-3.3
U2, U9
1
FT232RL
U5
1
RFM69HW
U6
1
TFT-LED_1_69_240x280
U7
1
FPC_TFT_LED_1_69_240x280
U8
1
FTDI
J1
1
SPI VSPI
J2
1
SPI HSPI
J3
1
USB_C_Receptacle_USB2.0
J4
1
ANT
J5
1
VCC PWR
J6
1
BLK
J7
1
PWR_OUT
J8
1
GND_OUT
J9
2
3V3_OUT
J10, J11
2
GPIO
J12, J13
1
RESET
B1
2
SolderJumper_2_Bridged
JP1, JP2
1
BOOT
SW2
Show 11 more
QtyPartRefs
2
LED
D1, D2
2
D_Schottky
D3, D4
1
1uF
C1
2
0.1uF
C2, C6
2
10uF
C3, C7
4
22uF
C4, C5, C9, C10
1
10K
R1
2
5K1
R3, R4
2
270R
R5, R6
2
47k
R7, R8
1
?
R9

Project5-ESP32-WROOM-PZEM design files

The KiCad project lives in the HowardsPlayPen/Project5-ESP32-WROOM-PZEM repository on GitHub; these links point at the commit this page was built from.

Project5-ESP32-WROOM-PZEM: common questions

What microcontroller does the Project5-ESP32-WROOM-PZEM use?

The Project5-ESP32-WROOM-PZEM is built around the ESP32-WROOM-32D, from the ESP32 family.

How big is the Project5-ESP32-WROOM-PZEM PCB?

The Project5-ESP32-WROOM-PZEM measures 95 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Project5-ESP32-WROOM-PZEM?

45 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the Project5-ESP32-WROOM-PZEM design files?

From the HowardsPlayPen/Project5-ESP32-WROOM-PZEM repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Project5-ESP32-WROOM-PZEM design in my own project?

The repository has no license, so all rights stay with HowardsPlayPen. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Project5-ESP32-WROOM-PZEM without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards