HardLabs

Jackco esp32-pico panel v2

huming2207·jackco-esp·jackco-esp32-pico/jackco-esp32-pico-panel-v2.kicad_pcb

Jackco esp32-pico panel v2 PCB layout, top view — open source RP2040/RP2350 board by huming2207

About the Jackco esp32-pico panel v2 PCB

Jackco esp32-pico panel v2 is an open source RP2040/RP2350 PCB design by huming2207, published on GitHub. It is a 2-layer board measuring 99 × 99 mm, with 29 components from 18 distinct parts.

Its main chip is the ESP32-PICO-D4, from the RP2040/RP2350 family. Other key parts include the ESP-PSRAM32, CH340C and AMS1117. By type, the board carries 9 capacitors, 6 resistors, 4 ICs, 4 connectors, 2 transistors and 2 switches.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

JackcoESP dev boards

See jackco-esp32-pico directory for more details

- SoC/Module: ESP32-PICO-D4 - RAM: 520KB built-in SRAM, with ESP pSRAM pads for optional pSRAM - Antenna: Rainsun AN9520

Main components on the Jackco esp32-pico panel v2

ESP32-PICO-D4ESP-PSRAM32CH340CAMS1117

Jackco esp32-pico panel v2 bill of materials (BOM)

29 components, 18 distinct parts.

QtyPartRefs
1
ESP32-PICO-D4
U1
1
ESP-PSRAM32
U2
1
CH340C
U3
1
AMS1117
U4
2
S8050
Q1, Q2
1
USB
J1
1
GPIO
J2
1
GPIO
J3
1
VUSB
J4
1
AN9520
ANT1
1
BOOT
SW1
1
RESET
SW2
1
LED
D1
6
0.1uF
C1, C2, C4, C5, C6, C9
3
10uF
C3, C7, C8
3
10K
R1, R2, R3
2
5.11K
R4, R5
1
470
R6

Jackco esp32-pico panel v2 design files

The KiCad project lives in the huming2207/jackco-esp repository on GitHub; these links point at the commit this page was built from.

Jackco esp32-pico panel v2: common questions

What microcontroller does the Jackco esp32-pico panel v2 use?

The Jackco esp32-pico panel v2 is built around the ESP32-PICO-D4, from the RP2040/RP2350 family.

How big is the Jackco esp32-pico panel v2 PCB?

The Jackco esp32-pico panel v2 measures 99 × 99 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Jackco esp32-pico panel v2?

29 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Jackco esp32-pico panel v2 design files?

From the huming2207/jackco-esp repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Jackco esp32-pico panel v2 design in my own project?

The repository has no license, so all rights stay with huming2207. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Jackco esp32-pico panel v2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in jackco-esp

Similar boards