Rj45
hwkim3330·sfp-auto-ethernet·hw/rj45/rj45.kicad_pcb
About the Rj45 PCB
Rj45 is an open source STM32 PCB design by hwkim3330, published on GitHub. It is a 6-layer board measuring 64.4 × 17 mm, with 65 components from 26 distinct parts.
Its main chip is the STM32G031F6P6, from the STM32 family. Other key parts include the RTL8221B-VB-CG, TPS62822DLCR and TPS22918DBVR. By type, the board carries 36 capacitors, 16 resistors, 5 inductors, 4 ICs, 2 connectors and 1 crystal.
From the project
SFP modules that speak SGMII to the host and 100/1000BASE-T1, 1000BASE-T or 10BASE-T1S to the world (KiCad)
A copper SFP built around the Realtek RTL8221B. It runs 2500BASE-X (3.125 Gbaud) or SGMII to the host, and 100M / 1G / 2.5GBASE-T on the jack.
Schematic, 6-layer PCB (routed), fab outputs and a JLC panel are all in place. Order files are in jlc/, and the order sheet is ORDER.md. Nothing has been built.
- The body is 11.8 mm wide up to the cage front. From there a 17 mm nose carries the jack, which sits entirely outside the cage. The board is 64.4 mm long. - Six layers, JLC06101H-3313. The same 3313 prepreg (0.0994 mm, Dk 4.1) sits under F and B as on the 4-layer stack, so the pairs keep…

Main components on the Rj45
Rj45 bill of materials (BOM)
65 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RTL8221B-VB-CG | QFN-48-1EP_6x6mm_P0.4mm_EP4.3x4.3mm | U1 |
| 1 | STM32G031F6P6 | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | TPS62822DLCR TPS62822DLC | Texas_VSON-HR-8_1.5x2mm_P0.5mm | U3 |
| 1 | TPS22918DBVR | SOT-23-6 | U4 |
| 1 | MST8011AI-72-33E25.000000 MST8011AI-72-33E25 | Oscillator_SMD_MST_2016-4Pin | X1 |
| 1 | SFP edge (INF-8074i) | SFP_Module_Edge | J1 |
| 1 | KH-RJ45-58-8P8C | RJ45_Kinghelm_KH-RJ45-58 | J2 |
| 1 | LP72450ANL | LINKPP_LP72450ANL | T1 |
| 4 | BLM18KG601SH1 | L_0603_1608Metric | FB1, FB2, FB3, FB4 |
| 1 | DFE201610E-1R0M 1uH DFE201610E-1R0M | L_Murata_DFE201610P | L1 |
| 2 | 1UF 1uF | C_0402_1005Metric | C1, C42 |
| 9 | 100NF 100nF | C_0402_1005Metric | C2, C5, C6, C36, C37, C38, C39, C41 +1 |
| 16 | 100NF 100nF | C_0201_0603Metric | C3, C4, C7, C8, C9, C10, C11, C12 +8 |
| 5 | 10UF 10uF | C_0603_1608Metric | C21, C22, C33, C34, C45 |
| 1 | 4.7UF 4.7uF | C_0402_1005Metric | C32 |
| 1 | 120PF 120pF | C_0201_0603Metric | C35 |
| 1 | 1206B102K202NT 1nF 2kV | C_1206_3216Metric | C40 |
| 1 | 2.2NF 2.2nF | C_0402_1005Metric | C44 |
| 1 | 57.6k 1% | R_0201_0603Metric | R3 |
| 1 | 100k 1% | R_0201_0603Metric | R4 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10K 10k | R_0402_1005Metric | R5 |
| 1 | 2.49k 1% | R_0201_0603Metric | R9 |
| 1 | 1.5K 1.5k | R_0201_0603Metric | R10 |
| 6 | 4.7K 4.7k | R_0201_0603Metric | R11, R12, R13, R19, R20, R21 |
| 4 | 75 | R_0402_1005Metric | R14, R15, R16, R17 |
| 1 | 100K 100k | R_0201_0603Metric | R18 |
Rj45 design files
The KiCad project lives in the hwkim3330/sfp-auto-ethernet repository on GitHub; these links point at the commit this page was built from.
- Layouthw/rj45/rj45.kicad_pcb
- Schematichw/rj45/rj45.kicad_sch
- BOMhw/rj45/fab/rj45-bom.csv
Rj45: common questions
What microcontroller does the Rj45 use?
The Rj45 is built around the STM32G031F6P6, from the STM32 family.
How big is the Rj45 PCB?
The Rj45 measures 64.4 × 17 mm, has 6 copper layers and is 1 mm thick.
How many components are on the Rj45?
65 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rj45 design files?
From the hwkim3330/sfp-auto-ethernet repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rj45 design in my own project?
The repository has no license, so all rights stay with hwkim3330. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rj45 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in sfp-auto-ethernet
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k