Rj45 panel

hwkim3330·sfp-auto-ethernet·hw/rj45/panel/rj45_panel.kicad_pcb

Rj45 panel PCB layout, top view — open source STM32 board by hwkim3330

About the Rj45 panel PCB

Rj45 panel is an open source STM32 PCB design by hwkim3330, published on GitHub. It is a 6-layer board measuring 71.4 × 107 mm, with 65 components from 26 distinct parts.

Its main chip is the STM32G031F6P6, from the STM32 family. Other key parts include the RTL8221B-VB-CG, TPS62822DLC and TPS22918DBVR. By type, the board carries 36 capacitors, 16 resistors, 5 inductors, 4 ICs, 2 connectors and 1 crystal.

From the project

SFP modules that speak SGMII to the host and 100/1000BASE-T1, 1000BASE-T or 10BASE-T1S to the world (KiCad)

A copper SFP built around the Realtek RTL8221B. It runs 2500BASE-X (3.125 Gbaud) or SGMII to the host, and 100M / 1G / 2.5GBASE-T on the jack.

Schematic, 6-layer PCB (routed), fab outputs and a JLC panel are all in place. Order files are in jlc/, and the order sheet is ORDER.md. Nothing has been built.

- The body is 11.8 mm wide up to the cage front. From there a 17 mm nose carries the jack, which sits entirely outside the cage. The board is 64.4 mm long. - Six layers, JLC06101H-3313. The same 3313 prepreg (0.0994 mm, Dk 4.1) sits under F and B as on the 4-layer stack, so the pairs keep…

Rj45 panel, from the project README
From the project README

Main components on the Rj45 panel

Rj45 panel bill of materials (BOM)

65 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RTL8221B-VB-CG
U1
1
STM32G031F6P6
U2
1
TPS62822DLC
U3
1
TPS22918DBVR
U4
1
MST8011AI-72-33E25
X1
1
SFP edge (INF-8074i)
J1
1
KH-RJ45-58-8P8C
J2
1
LP72450ANL
T1
4
BLM18KG601SH1
FB1, FB2, FB3, FB4
1
1uH DFE201610E-1R0M
L1
2
1uF
C1, C42
9
100nF
C2, C5, C6, C36, C37, C38, C39, C41 +1
16
100nF
C3, C4, C7, C8, C9, C10, C11, C12 +8
5
10uF
C21, C22, C33, C34, C45
1
4.7uF
C32
1
120pF
C35
1
1nF 2kV
C40
1
2.2nF
C44
1
57.6k 1%
R3
1
100k 1%
R4
Show 6 more
QtyPartRefs
1
10k
R5
1
2.49k 1%
R9
1
1.5k
R10
6
4.7k
R11, R12, R13, R19, R20, R21
4
75
R14, R15, R16, R17
1
100k
R18

Rj45 panel design files

The KiCad project lives in the hwkim3330/sfp-auto-ethernet repository on GitHub; these links point at the commit this page was built from.

Rj45 panel: common questions

What microcontroller does the Rj45 panel use?

The Rj45 panel is built around the STM32G031F6P6, from the STM32 family.

How big is the Rj45 panel PCB?

The Rj45 panel measures 71.4 × 107 mm, has 6 copper layers and is 1 mm thick.

How many components are on the Rj45 panel?

65 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rj45 panel design files?

From the hwkim3330/sfp-auto-ethernet repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Rj45 panel design in my own project?

The repository has no license, so all rights stay with hwkim3330. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Rj45 panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in sfp-auto-ethernet

Similar boards