10 open source boards using the STM32G031F6P6
Real designs built with the STM32G031F6P6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Noisecard
tcsullivan
85 × 50 mm29 parts2LGPL-3.021STM32
T1s
hwkim3330
58.4 × 11.8 mm83 parts6LNo license0STM32
Sg gain link
oats-center
76.2 × 89.1 mm64 parts4LNo license3STM32
T1s panel
hwkim3330
70 × 81 mm83 parts6LNo license0STM32
Rj45
hwkim3330
64.4 × 17 mm65 parts6LNo license0STM32
Rj45 panel
hwkim3330
71.4 × 107 mm65 parts6LNo license0STM32
T1 panel
hwkim3330
71.5 × 81 mm59 parts4LNo license0STM32
T1 v0
hwkim3330
58 × 11.8 mm17 parts4LNo license0STM32
Tc link
oats-center
76.2 × 87.8 mm36 parts4LNo license3STM32
Epc gain link
oats-center
76.2 × 89.1 mm27 parts4LNo license3
The STM32G031F6P6 in open source designs
The gallery holds 10 open source boards using the STM32G031F6P6 from 3 GitHub repositories; a typical one measures about 71.5 × 81 mm and carries around 62 components.
90% use four copper layers or more, and 10% carry an open source license.
The most starred is Noisecard by tcsullivan.
Microcontrollers on boards using the STM32G031F6P6
What boards using the STM32G031F6P6 are built for
STM32G031F6P6: common questions
Where can I find a STM32G031F6P6 reference design?
Each of the 10 boards on this page is a real design using the STM32G031F6P6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32G031F6P6 use?
Most are built on STM32 (10).
How big is a typical board using the STM32G031F6P6?
The median is 71.5 × 81 mm, and 10% are two-layer designs.
What is the most popular open source board using the STM32G031F6P6?
By GitHub stars, Noisecard by tcsullivan, with 21 stars.
Can I simulate one of these boards using the STM32G031F6P6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.