HardLabs

MorphESP240 to Sharp PC-G850* Interface

hwreverse·MorphESP240_Shields·morphesp240_g850_interface/morphesp240_g850_interface.kicad_pcb

MorphESP240 to Sharp PC-G850* Interface PCB layout, top view — open source board by hwreverse
Simulate this board

About the MorphESP240 to Sharp PC-G850* Interface PCB

MorphESP240 to Sharp PC-G850* Interface is an open source PCB design by hwreverse, published on GitHub under the MIT license. It is a 2-layer board measuring 87.6 × 71.1 mm, with 45 components from 18 distinct parts.

Other key parts include the 74HC04D. By type, the board carries 18 resistors, 13 connectors, 8 transistors, 3 capacitors, 2 switches and 1 IC.

It belongs with the dev boards & breakouts, power & battery and sensors designs in this gallery.

From the project

HWR0's Shield Designs for the MorphESP 240 by @ccadic

- Next evolution of the Gamepad Shield in a new design with two additional analog josticks and a I2C Gyroscope + Accelerometer integrated circuit for Position & Inertia capture. - 2x4 Button Gamepad Shield and connection to optional Buzzer ready to be fabricated and assembled by the PCBA service of your choice. It can also be soldered by hand as I used only 0805 and SOT-23 footprints for the passives and the transistor (on the backside). Pushbuttons are classic, comfy 12mm x 12mm x 4.3/5mm units, that won't use that much your fingertips.

MorphESP240 to Sharp PC-G850* Interface, from the project README
From the project README

Main components on the MorphESP240 to Sharp PC-G850* Interface

74HC04D

MorphESP240 to Sharp PC-G850* Interface bill of materials (BOM)

45 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
74HC04D
U1
8
BSS138
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
1
2.54P CNX
J1
1
1.27P CNX
J2
1
1.27P CNX
J3
1
2.54P CNX
J4
2
SolidPad-Connector
J5, J7
1
3.3V Connector
J6
1
CONN_01X04_MALE
RXD0/TXD0 from MorphESP32 240
J8
1
RTS to Ground Jumper
J9
1
CONN_01X10_MALE
Conn_01x10_Male
J10
1
3.3V Calculator Serial Output
J11
1
CNDup
J12
1
CONN_01X11_MALE
Conn_01x11_Male
J13
1
C620359
Button A
SW1
1
C620359
Button B
SW2
3
100NF
100nF
C1, C2, C3
18
10K
R1, R2, R3, R4, R5, R6, R7, R8 +10

MorphESP240 to Sharp PC-G850* Interface design files

The KiCad project lives in the hwreverse/MorphESP240_Shields repository on GitHub; these links point at the commit this page was built from.

MorphESP240 to Sharp PC-G850* Interface: common questions

How big is the MorphESP240 to Sharp PC-G850* Interface PCB?

The MorphESP240 to Sharp PC-G850* Interface measures 87.6 × 71.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MorphESP240 to Sharp PC-G850* Interface?

45 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MorphESP240 to Sharp PC-G850* Interface design files?

From the hwreverse/MorphESP240_Shields repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the MorphESP240 to Sharp PC-G850* Interface design in my own project?

Yes, under the terms of its MIT license, which hwreverse chose for the repository.

More boards in MorphESP240_Shields

Similar boards